Abstract:3D printing is established as an alternative microfabrication approach, and while printer resolution limits the direct 3D printing of pore features in the micron/submicron range, the use of nanoporous materials allows for the integration of porous membranes in 3D printed devices. Here, nanoporous membranes were formed by digital light projection (DLP) 3D printing using a polymerization-induced phase separation (PIPS) resin formulation. A functionally integrated device was fabricated using resin exchange following a simple, semi-automated manufacturing process. Printing of porous materials from a PIPS resin formulations based on polyethylene glycol diacrylate 250 as monomer was investigated by varying exposure time, photoinitiator concentration, and porogen content to yield materials with average pore size varying from 30-800 nm. Aiming for printing a size-mobility trap for electrophoretic extraction of deoxyribonucleic acid (DNA), conditions for printing materials with a mean pore size of 346 nm and 30 nm were selected for integration in a fluidic device using a resin exchange approach. Under optimized conditions (12.5 V for 20 min), cell concentrations as low as 103 cells per mL were detected following amplification of the extract by quantitative polymerase chain reaction (qPCR) at a Cq of 29. The efficacy of the size/mobility trap formed by the two membranes is demonstrated by detecting DNA concentrations equivalent to the input detected in the extract while removing 73% of the protein in the lysate. The DNA extraction yield was not statistically different from that obtained using a spin column, but manual handling and equipment needs were significantly reduced. This study demonstrates that nanoporous membranes with tailored properties can be integrated into fluidic devices using a simple manufacturing process based on resin exchange DLP. The process was used to manufacture a size-mobility trap and applied for the electroextraction and purification of DNA from E. coli lysate with reduced processing time, manual handling, and equipment needs compared with a commercially sourced DNA extraction kit. Combining manufacturability and portability with ease of use, the approach has demonstrated potential for manufacturing and using devices used in point-of-need testing for diagnostic nucleic acid amplification testing.

DEVELOPMENT OF A LAMINATED LASER-PRINTED MICRODEVICE FOR DYNAMIC-SOLID PHASE DNA EXTRACTION IN AN ROTATIONALLY-DRIVEN PLATFORM

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

A Low-Cost, Disposable and Portable Inkjet-Printed Biochip for the Developing World

From cellular lysis to microarray detection, an integrated thermoplastic elastomer (TPE) point of care Lab on a Disc

A filter paper-based microdevice for low-cost, rapid, and automated DNA extraction and amplification from diverse sample types.

UV-Assisted Hyperbranched Poly(β-amino Ester) Modification of a Silica Membrane for Two-Step Microfluidic DNA Extraction from Blood

Development of epoxy resin-based microfluidic devices using CO2 laser ablation for DNA amplification point-of-care (POC) applications

A centrifugal microfluidic device with integrated gold leaf electrodes for the electrophoretic separation of DNA

3D printed integrated nanoporous membranes for electroextraction of DNA

Rapid Fabrication by Digital Light Processing 3D Printing of a SlipChip with Movable Ports for Local Delivery to Ex Vivo Organ Cultures

Low-High-Low Rotationally Pulse-Actuated Serial Dissolvable Film Valves Applied to Solid Phase Extraction and LAMP Isothermal Amplification for Plant Pathogen Detection on a Lab-on-a-Disc

Fabrication routes via projection stereolithography for 3D-printing of microfluidic geometries for nucleic acid amplification

A Robotics Platform for Automated Batch Fabrication of High Density, Microfluidics-Based DNA Microarrays, with Applications to Single Cell, Multiplex Assays of Secreted Proteins.

Development of 3D printed mesofluidic devices to elute and concentrate DNA

A Portable Digital Loop-Mediated Isothermal Amplification Platform Based on Microgel Array and Hand-Held Reader

A centrifugal microfluidic emulsifier integrated with oil storage structures for robust digital LAMP

A Lab-in-a-droplet Bioassay Strategy for Centrifugal Microfluidics with Density Difference Pumping, Power to Disc and Bidirectional Flow Control.

Design and Operation of a Portable Scanner for High Performance Microchip Capillary Array Electrophoresis.

On-board control of wax valve on active centrifugal microfluidic chip and its application for plasmid DNA extraction

Room temperature roll-to-roll additive manufacturing of polydimethylsiloxane-based centrifugal microfluidic device for on-site isolation of ribonucleic acid from whole blood

A home-made pipette droplet microfluidics rapid prototyping and training kit for digital PCR, microorganism/cell encapsulation and controlled microgel synthesis