Abstract:All-solid-state-batteries (ASSBs) are considered the future replacements for traditional lithium-ion batteries, thanks to their superior energy density and enhanced safety. The ionic conductivity of solid electrolytes (SEs) could be improved to match that of liquid electrolytes through careful material design and optimization. However, the relatively sluggish kinetics at the interface between at the active material (lithium metal or cathode materials) and the SE interface remain a hurdle for the wider adoption of ASSBs. The SE’s contact with the anode and cathode materials is inferior compared to that of its liquid counterpart, and improper working conditions can easily lead to the formation of many voids and pores. This results in an increased interface resistance and a deteriorated power density of the ASSB cell. The mechanical contact between the anode material and the SE is more significant due to the larger volumetric expansion and contraction during cycling compared to the cathode side. In addition, high stack pressure and plating current density can also induce the penetration of lithium dendrites. Therefore, it is vital to explore the stability envelope for the anode-SE interface, namely determining the operation condition under which void formation and dendrite growth could be suppressed for the effective design and utilization of ASSBs. Pressure and current density are two controllable condition parameters in the operation of ASSBs 1, 2 . High current density can lead to the formation of numerous voids at the Li/SE interface during stripping, as well as the initiation and growth of lithium metal dendrite within the SE. This results in increased polarization and potential battery failure. Applying stack pressure to the ASSB can stabilize the Li/SE interface during manufacturing and operation, as the creep of Li metal is believed to occur once its stress surpasses a certain threshold. The plastic ‘flow’ of Li metal could help to hinder the growth of voids 2 and keep good contact condition. However, at an excessively large pressure 3, 4 , dendrites can penetrate the SE, which cause a short-circuit in the ASSB and lead to failure 5 . Therefore, an electro-chemo-mechanical model that can describe the large-deformation mechanical properties of Li metal and its coupled mechanisms with the reactions at the Li/SE interface is essential for determining the stability envelope for stable stripping and plating of lithium in the ASSBs. In this work, a phase-field electro-chemo-mechanical model is proposed, in which the coupling of void diffusion, lattice annihilation, stripping and plating reactions, and mechanical properties of lithium metal are comprehensively described. The first contribution of this work is a comprehensive summary of the mechanical properties of the lithium metal under different temperatures and deformation rates, generating a unified deformation-mechanism map for the general battery manufacturing and characterizing community. Based on this map, our phase-field electro-chemo-mechanical model is developed to include important features below. The diffusion of vacancies and Li sites in the lithium metal is considered to simulate the lattice annihilation and the void formation during stripping. The flow of lithium metal caused by creeping or plasticity is incorporated in the kinetical equation of the order parameters. The plating and stripping kinetics are described by the modified Butler-Volmer equation in which the effect of vacancies is considered The general theory proposed in this work can simulate the electro-chemo-mechanical effects at different operation conditions for Li metal or other Li alloy anode materials, which is believed to be a powerful tool for the effective design, manufacturing and management of next-generation batteries. References: T. Krauskopf, H. Hartmann, W. G. Zeier, and J. Janek, ACS Appl Mater Interfaces, 11 (15), 14463-14477 (2019). T. Krauskopf, B. Mogwitz, C. Rosenbach, W. G. Zeier, and J. Janek, Advanced Energy Materials, 9 (44), (2019). D. Cao, K. Zhang, W. Li, Y. Zhang, T. Ji, X. Zhao, E. Cakmak, J. Zhu, Y. Cao, and H. Zhu, Advanced Functional Materials, (2023). L. Zhao, W. Li, C. Wu, Q. Ai, L. Guo, Z. Chen, J. Zheng, M. Anderson, H. Guo, J. Lou, Y. Liang, Z. Fan, J. Zhu, and Y. Yao, Advanced Energy Materials, (2023). E. J. Cheng, A. Sharafi, and J. Sakamoto, Electrochimica Acta, 223 85-91 (2017). Figure 1

Modeling of Electrochemical Performance and its Relation to Mechanical Responses of Li Metal Batteries

Modeling the Electro-Chemo-mechanical Failure at the Lithium-Solid Electrolyte Interface: Void Evolution and Lithium Penetration

Multi-scale mechanical-electrochemical coupled modeling of stress generation and its impact on different battery cell geometries

A Large-Deformation Phase-Field Model for Characterizing Electro-Chemo-Mechanical Failure Mechanisms at Li/Solid Electrolyte Interface

A Fully Coupled Mechano-Electrochemical Model for All-Solid-State Thin-Film Li-Ion Batteries with Non-Porous Electrodes: Effects of Chemo-Mechanical Expansions on Battery Performance and Optimization Strategies for Stress Evolution

Mechanical Modeling and Testing of Pouch Cells under Various Loading Conditions

Modified Stoney Model and Optimization of Electrode Structure Based on Stress Characteristics

A Large Deformation and Fracture Model of Lithium-Ion Battery Cells Treated As a Homogenized Medium

Electrochemical–Mechanical Coupling Is Essential to Predict Solid-Electrolyte Fracture during Li-Metal Plating

A mathematical model for mechanically-induced deterioration of the binder in lithium-ion electrodes

Stress Evolution in Lithium Metal Electrodes and the Impact of Artificial Passivating Layers

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

Modeling and Analysis of Coupled Thermal and Mechanical Capacity Degradation in Silicon-Based Lithium-Ion Batteries

A Computational Model for All-Solid-State Batteries Coupling Electrochemistry and Solid Mechanics on Resolved Microstructures Enabling Optimization of Battery Electrode Design

Effective thermo-electro-mechanical modeling framework of lithium-ion batteries based on a representative volume element approach

Deformation and failure behaviors of anode in lithium-ion batteries: Model and mechanism

Enhanced strength and temperature dependence of mechanical properties of Li at small length scales and its implications for Li metal anodes

Modeling of Porous Lithium Metal Electrodes: Turning the Li-Dendrite Problem Around

On Modeling the Detrimental Effects of Inhomogeneous Plating-and-Stripping at a Lithium-Metal/Solid-Electrolyte Interface in a Solid-State-Battery

Development of Multi-Physical Simulation Models for Quasi-Static Load Analysis to Predict the Behavior of Li-Ion and Na-Ion Batteries Under Different Mechanical Abuse Loadings

Taming Metal–Solid Electrolyte Interface Instability Via Metal Strain Hardening