Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. After pneumatic shot peening, compressive residual stress is induced on the surface of the target, which will improve the fatigue life. During the process, surface roughness is also induced, which may reduce the fatigue life. To achieve the optimum compressive residual stress with the smallest surface roughness, the formation mechanism of the residual stress field and the surface topography are revealed. Then, pneumatic shot peening is simulated by using a discrete element method–finite element method coupled model. Based on the effects of four variables (the incident angle θ, the initial shot velocity v0, the shot radius R) and the mass flow rate rm on five parameters (the equivalent plastic strain, the equivalent stress, the surface compressive residual stress, the maximum compressive residual stress), the surface roughness is investigated. The results show that it induces a residual elastic–plastic strain after the impact of a single shot, which can form a crater and a hemispherical residual stress field. After the impact of many random shots, scattered craters connect with each other, therewith a rough and continuous surface topography is formed. Scattered residual stress fields couple with each other, and a constant residual stress layer with the compressive residual stress in the surface and the tensile residual stress in the subsurface are formed. All five parameters are determined by the residual elastic–plastic strain, which increases as the augment of the normal impact velocity, the shot mass, and the coverage rate. Along with the increase of θ and rm, these five parameters firstly increase and then decrease; with the increase of v0 and R, these five parameters increase. Therefore, reasonable values of θ, v0, R, and rm should be chosen to obtain the optimum compressive residual stress with as small surface roughness as possible.

The influence of compressive residual stress on metallurgical and mechanical properties of materials exposed to shot peening: a review

Nanoscale microstructural factors contributing to the improvement of the micromechanical wear properties of mechanical shot-peened nickel-based superalloys

State of the Art and Perspectives on Surface-Strengthening Process and Associated Mechanisms by Shot Peening

Investigation of residual stress, stress relaxation and work hardening effects induced by shot peening on the fatigue life of AA 6005-T6 aluminum alloy

Experimental Study on the Effect of Shot Peening and Re-Shot Peening on the Residual Stress Distribution and Fatigue Life of 20CrMnTi

Effects of Shot Peening and Cavitation Peening on Properties of Surface Layer of Metallic Materials—A Short Review

Effects of Conventional and Severe Shot Peening on Residual Stress and Fatigue Strength of Steel AISI 1060 and Residual Stress Relaxation Due to Fatigue Loading: Experimental and Numerical Simulation

Simulations of the effect of shot peening backstress on nanoindentation

Enhancing plain fatigue strength in aluminum alloys through shot peening: Experimental investigations and a strain energy density interpretation

Shot peening coverage effect on laser powder bed fused steel

Effect of laser shot peening on precipitation hardened aluminum alloy 6061-T6 using low energy laser

Effects of shot peening and artificial surface defects on fatigue properties of 50CrV4 steel

Studies on residual stress and surface topography after pneumatic shot peening using discrete element method–finite element method coupled model

Surface integrity of consecutive shot-peened additively manufactured 316L stainless steel

A study of the effect of dual shot peening on the surface integrity of carburized steel: combined experiments with dislocation density-based simulations

The influence of shot peening on mechanical properties, wear, and corrosion resistance of 42CrMo steel

Molecular modeling of Ti-6Al-4V alloy shot peening: the effects of diameter and velocity of shot particles and force field on mechanical properties and residual stress

Effect of Micro-Shot Peening on the Fatigue Performance of AISI 304 Stainless Steel

Effects of the Shot Peening Process on Corrosion Resistance of Aluminum Alloy: A Review

Surface characteristics and stress corrosion behavior of AA 7075-T6 aluminum alloys after different shot peening processes

Effect of Laser Scanning Speed and Fine Shot Peening on Pore Characteristics, Hardness, and Residual Stress of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion