Abstract:High nitrogen oxide levels of the conventional diesel engine combustion often requires the introduction of exhaust gas recirculation at high engine loads. This can adversely affect the smoke emissions and fuel conversion efficiency associated with a reduction of the in-cylinder air-fuel ratio (lambda). In addition, low exhaust gas temperatures at low engine loads reduce the effectiveness of aftertreatment systems necessary to meet stringent emissions regulations. These are some of the main issues encountered by current heady-duty diesel engines. In this work, variable valve actuation–based advanced combustion control strategies have been researched as means of improving upon the engine exhaust temperature, emissions, and efficiency. Experimental analysis was carried out on a single-cylinder heady-duty diesel engine equipped with a high-pressure common-rail fuel injection system, a high-pressure loop cooled exhaust gas recirculation, and a variable valve actuation system. The variable valve actuation system enables a late intake valve closing and a second intake valve opening during the exhaust stroke. The results showed that Miller cycle was an effective technology for exhaust temperature management of low engine load operations, increasing the exhaust gas temperature by 40 °C and 75 °C when running engine at 2.2 and 6 bar net indicated mean effective pressure, respectively. However, Miller cycle adversely effected carbon monoxide and unburned hydrocarbon emissions at a light load of 2.2 bar indicated mean effective pressure. This could be overcome when combining Miller cycle with a second intake valve opening strategy due to the formation of a relatively hotter in-cylinder charge induced by the presence of internal exhaust gas recirculation. This strategy also led to a significant reduction in soot emissions by 82% when compared with the baseline engine operation. Alternatively, the use of external exhaust gas recirculation and post injection on a Miller cycle operation decreased high nitrogen oxide emissions by 67% at a part load of 6 bar indicated mean effective pressure. This contributed to a reduction of 2.2% in the total fluid consumption, which takes into account the urea consumption in aftertreatment system. At a high engine load of 17 bar indicated mean effective pressure, a highly boosted Miller cycle strategy with exhaust gas recirculation increased the fuel conversion efficiency by 1.5% while reducing the total fluid consumption by 5.4%. The overall results demonstrated that advanced variable valve actuation–based combustion control strategies can control the exhaust gas temperature and engine-out emissions at low engine loads as well as improve upon the fuel conversion efficiency and total fluid consumption at high engine loads, potentially reducing the engine operational costs.

A CFD Modelling Approach for the Operation Analysis of an Exhaust Backpressure Valve Used in a Euro 6 Diesel Engine

Exergy analysis on throttle reduction efficiency based on real gas equations

Diesel engine optimization and exhaust thermal management by means of variable valve train strategies

Three-Dimensional Computational Fluid Dynamics Modeling of a 6V150 Diesel Engine

Theoretical investigation on the throttle pressure reducing valve through CFD simulation and validating experiments

Model development and experimental validation of an exhaust brake supported dual loop exhaust gas recirculation on a medium duty Diesel engine

Electromagnetic Valve Train for Gasoline Engine Exhaust System

Multidimensional Computational Fluid Dynamics Combustion Process Modeling of a 6V150 Diesel Engine

The Effect of Exhaust Throttling on Hcci - Alternative Way to Control Egr and In-Cylinder Flow

CFD Simulation of Dynamic Characteristics of a Solenoid Valve for Exhaust Gas Turbocharger System

Thermographic Analysis of Exhaust Gas and Emissions by Varying Catalyst Behaviour and Injection Parameters

Feasibility Study of A Scroll Expander for Recycling Low-Pressure Exhaust Gas Energy from A Vehicle Gasoline Engine System

Modeling and control of fuel distribution in a dual-fuel internal combustion engine leveraging late intake valve closings

Hybrid model for exhaust systems in vehicle thermal management simulations

Dynamic Modeling of CO2 Transcritical Power Cycle for Waste Heat Recovery of Gasoline Engines

Variable valve actuation–based combustion control strategies for efficiency improvement and emissions control in a heavy-duty diesel engine

Development of 1D Model of Constant-Volume Combustor and Numerical Analysis of the Exhaust Nozzle

Identification of Potential Efficiency Opportunities in Internal Combustion Engines Using a Detailed Thermodynamic Analysis of Engine Simulation Results

A phenomenological base semi-physical thermodynamic model for the cylinder and exhaust manifold of a natural gas 2-megawatt four-stroke internal combustion engine

Through Flow Models for Engine Turbocharging and Exhaust Heat Recovery

Analysis of Thermal Boundary Condition and FEA Calculation of Temperature Field for the Exhaust Valve of Diesel Engine