Abstract:The strategic implementation of local blowing (LB) around a circular cylinder within a uniform flow has demonstrated its capacity to effectively suppress aerodynamic noise under specific blowing conditions. This study aimed to comprehend the underlying mechanism driving noise reduction through the synchronisation of far-field noise with surface pressure fluctuations, which were measured at various peripheral angles. The parameters under examination for LB were the angle of blowing in relation to the freestream flow ( θ b ) and the equivalent momentum coefficient ( C μ ). A dedicated series of chambers were employed to facilitate LB at θ b = ± 41 ° , ± 90 ° , ± 131 ° , and 180 ° across the ranges of C μ = 0 . 007 –0.036 ( R e = 0 . 7 × 1 0 5 ) and C μ = 0 . 003 –0.016 ( R e = 1 . 04 × 1 0 5 ). Notably, LB at θ b = ± 41 ° and 180 ° exhibited a remarkable reduction in tonal noise within the C μ range of 0.007 to 0.036. Despite this achievement, the most optimal overall sound pressure level was achieved at θ b = 180 ° . It was determined that the dissimilarity in noise reduction among these LB cases was attributed to additional high-frequency noise generated by the blowing technique. The connection between the near- and far-field signals was established through recorded coherence values. The investigation highlighted that surface pressure fluctuations initiated by vortex shedding in the pre- and post-separation regions, particularly at the fundamental vortex shedding frequency, had the most significant impact on far-field noise. The attenuation of such surface pressure fluctuations played a pivotal role in tonal noise reduction by LB, as evidenced by notable reductions in lift fluctuations and the absence of amplitude modulation in both the time and frequency domains.

Relationship between vortex shedding noise and remotely-sensed surface pressure fluctuations of a structured porous-coated cylinder

Experimental near-field analysis for flow induced noise of a structured porous-coated cylinder

Experimental studies on pressure drag and aerodynamic noise of cylinder with porous coatings

Aeroacoustics of a Square Finite-Wall-Mounted Cylinder in Pressure-Gradient Flows

An investigation of wake flows produced by asymmetrically structured porous coated cylinders

Numerical study on passive flow and noise control for flow past cylinder by porous media coatings

Numerical study on reducing aerodynamic drag and noise of circular cylinders with non-uniform porous coatings

Experimental Studies on Simultaneously Reducing Flow Drag and Noise of a Circular Cylinder with a Downstream Porous Material Plate

Tandem Cylinder Aerodynamic Sound Control Using Porous Coating

Tandem Cylinder Flow and Noise Control

Numerical study of aerodynamic and aeroacoustic characteristics of flow over porous coated cylinders: Effects of porous properties

Experimental investigation of active local blowing on the aerodynamic noise reduction of a circular cylinder

Attenuation of vortex street by suction through the structured porous surface

Structure resolved simulations of flow around porous coated cylinders based on a simplified pore-scale model

On the Role of Surface Permeability for the Control of Flow Around a Circular Cylinder

An Experimental Investigation of Drag and Noise Reduction from a Circular Cylinder Using Longitudinal Grooves

The role of porous structure on airfoil turbulence interaction noise reduction

Analysis of Flow Field and Pneumatic Noise of The Flow around Series Cylinder

Experimental and Computational Studies of Vortex Shedding and Aerodynamic Sound for Flow over a Square Cylinder Near a Rigid Wall.

Noise reduction of sinusoidal wavy cylinder in subcritical flow regime

Impacts of porous material fluid bulk properties on noise attenuation performance of cylinder shell structure based on finite element model