Abstract:The strategic implementation of local blowing (LB) around a circular cylinder within a uniform flow has demonstrated its capacity to effectively suppress aerodynamic noise under specific blowing conditions. This study aimed to comprehend the underlying mechanism driving noise reduction through the synchronisation of far-field noise with surface pressure fluctuations, which were measured at various peripheral angles. The parameters under examination for LB were the angle of blowing in relation to the freestream flow ( θ b ) and the equivalent momentum coefficient ( C μ ). A dedicated series of chambers were employed to facilitate LB at θ b = ± 41 ° , ± 90 ° , ± 131 ° , and 180 ° across the ranges of C μ = 0 . 007 –0.036 ( R e = 0 . 7 × 1 0 5 ) and C μ = 0 . 003 –0.016 ( R e = 1 . 04 × 1 0 5 ). Notably, LB at θ b = ± 41 ° and 180 ° exhibited a remarkable reduction in tonal noise within the C μ range of 0.007 to 0.036. Despite this achievement, the most optimal overall sound pressure level was achieved at θ b = 180 ° . It was determined that the dissimilarity in noise reduction among these LB cases was attributed to additional high-frequency noise generated by the blowing technique. The connection between the near- and far-field signals was established through recorded coherence values. The investigation highlighted that surface pressure fluctuations initiated by vortex shedding in the pre- and post-separation regions, particularly at the fundamental vortex shedding frequency, had the most significant impact on far-field noise. The attenuation of such surface pressure fluctuations played a pivotal role in tonal noise reduction by LB, as evidenced by notable reductions in lift fluctuations and the absence of amplitude modulation in both the time and frequency domains.

Experimental near-field analysis for flow induced noise of a structured porous-coated cylinder

Relationship between vortex shedding noise and remotely-sensed surface pressure fluctuations of a structured porous-coated cylinder

An investigation of wake flows produced by asymmetrically structured porous coated cylinders

Numerical study on reducing aerodynamic drag and noise of circular cylinders with non-uniform porous coatings

Numerical study on passive flow and noise control for flow past cylinder by porous media coatings

Experimental studies on pressure drag and aerodynamic noise of cylinder with porous coatings

Numerical analysis of transport in porous media to reduce aerodynamic noise past a circular cylinder by application of porous foam

Structure resolved simulations of flow around porous coated cylinders based on a simplified pore-scale model

Numerical study of aerodynamic and aeroacoustic characteristics of flow over porous coated cylinders: Effects of porous properties

Analysis of Flow Field and Pneumatic Noise of The Flow around Series Cylinder

Experimental study on flow/noise of a circular cylinder with concentric/eccentric microperforated ring fairings

Experimental investigation of active local blowing on the aerodynamic noise reduction of a circular cylinder

Numerical Study of Porous Treatments on Controlling Flow around a Circular Cylinder

Numerical Investigation on Aerodynamic Noise of Flow past a Cylinder with Different Spanwise Lengths

Numerical Simulation of Cavitation Control around a Circular Cylinder Using Porous Surface by Volume Penalized Method

Noise reduction of sinusoidal wavy cylinder in subcritical flow regime

An Experimental Investigation of Drag and Noise Reduction from a Circular Cylinder Using Longitudinal Grooves

Flow and noise control of a cylinder using grooves filled with porous material

Numerical Simulation of Flow-Induced Noise in High Pressure Reducing Valve

The role of porous structure on airfoil turbulence interaction noise reduction

Aeroacoustics of a Square Finite-Wall-Mounted Cylinder in Pressure-Gradient Flows