Abstract:A new magnetic IIP was synthesized to develop an environmentally benign SPE coupled FAAS method for preconcentration, trace determination and removal of the persistent, bio‐accumulative, toxic contaminant of emerging concern; Ni(II). The method was optimized using RSM‐CCD and ANN. Apart from regeneration Ni(II) loaded IIP was exploited for reduction of permanganate ions, further reducing pollution. In order to study transportation and biomagnification of Ni(II) trace‐determination, and removal of Ni(II) was performed in ground water, wastewater, and food samples. A novel silica fabricated allyloxy ethanol based imprinted polymer is synthesised with surface area of 333 m2 g−1 and average pore size of 6.5 nm by an environment friendly one pot surface imprinting process. It was employed for the selective solid‐phase extraction (SPE) of trace Ni(II) in real samples prior to FAAS determination. The factor settings produced via central composite design in response surface methodology (RSM) (pH: 3.6; initial concentration; 800 mg L−1 and time; 15 minute) provide adsorption capacity of 176 mg g−1. Artificial neural network model employed on the RSM data, provided better predictability. Sips isotherm model and BSf kinetic model describes best the sorption phenomena of the homogenous binding terrain. The developed SPE‐coupled FAAS method demonstrate a detection limit of 1.62 μg L−1, quantification limit of 4.17 μg L−1, and Linear dynamic range of 20–8000 μg L−1. It was successfully applied to determine nickel in food (Spinach, Radish, Green tea infusion, Black tea infusion, Coffee, Soya milk, Chocolate Soya milk, Tobacco) and wastewater samples (>99 % removal). For five replicate determinations, the method's relative standard deviation was 2.3 %. The method was validated by analysing two certified reference materials, and the outcomes were well‐congruent with standard values. For the synthesised polymer Ni(II) exhibits higher distribution ratio than other competing ions (Cu(II), Pb(II), Cd(II), and Zn(II)) with the imprinting factor; β values of 5.73, 4.98, 6.80, and 5.04 respectively. The reusability experiments revealed that APS@Ni‐IIP retains a strong adsorption efficacy even after 15 cycles and after its exhaustion it was employed as catalyst for reducing permanganate ions, further reducing pollution. The rigid structure of mesoporous silica contributes to its acid resilience and reusability, which can lead to a relative increase in polymer performance in absorption rate and selectivity. Apart from the novelty in the synthesis, thorough examination of the method and material selectivity (in binary, ternary and multielement system), multi fold applications of determination, removal of Ni(II) and reduction of permanganate ions, makes APS@Ni‐IIP a promising candidate for environmental remediation.

Effective solid phase extraction for the enrichment of p-nitrophenol in water using microwave-assisted synthesized fly ash@ p-nitrophenol surface molecular imprinted polymer

Microwave-assisted synthesis of magnetic surface molecular imprinted polymer for adsorption and solid phase extraction of 4-nitrophenol in wastewater

Polyoxometalate derived materials as laccase‐mimic nanozyme and reduction catalyst for p‐nitrophenol remediation in water

Molecularly Imprinted Solid Phase Extraction Coupled with Gas Chromatography-Mass Spectrometry for Determination of N-Nitrosodiphenylamine in Water Samples.

Casting Liquid PDMS on the Self-assembled Bilayer Polystyrene Nanospheres to Prepare SERS Substrate with Two Layers of Nanopits for Detection of P-Nitrophenol

Magnetic Adsorbent Decorated with Poly(N-Isopropylacrylamide) (PNIPAM) Brushes for the Vortex-Assisted Solid Phase Extraction (VASPE) of Lead in Water, Cigarettes and Soil with High-Resolution Continuum Source Flame Atomic Absorption Spectrometry (HR-CS FAAS) Detection

Adsorption of P-Nitrophenol from Aqueous Solutions Onto Activated Carbon Fiber

Efficient and rapid removal of typical phenolic compounds from water with biobased porous organic polymers

Fluorine-functionalized magnetic amino microporous organic network for enrichment of perfluoroalkyl substances

A molecular imprinted fluorescence sensor based on carbon quantum dots for selective detection of 4-nitrophenol in aqueous environments

Surface Imprinted Superparamagnetic Nanoparticles for Rapid and Efficient Extraction of Bisphenol A from Water Samples

Hierarchical porous zeolitic imidazolate framework‐8 supported hollow-fiber liquid-phase microextraction of nine typical phenolic pollutants in water samples followed by electrophoretic analysis

ZIF-8/h-BN Coated Solid-Phase Microextraction Fiber Via Physical Coating Technology and Sol-Gel Technology for the Determination of Nitro Polycyclic Aromatic Hydrocarbons from Water Samples

Efficient removal of p-nitrophenol from water by imidazolium ionic liquids functionalized cellulose microsphere

Molecularly Imprinted Polymer As Micro-Solid Phase Extraction Combined with High Performance Liquid Chromatography to Determine Phenolic Compounds in Environmental Water Samples

A Novel Molecularly Imprinted Polymer-Solid Phase Extraction Method Coupled with High Performance Liquid Chromatography Tandem Mass Spectrometry for the Determination of Nitrosamines in Water and Beverage Samples.

Silica Grafted Imprinted Mesoporous Polymer for the Development of SPE Coupled FAAS Method of Nickel Determination, Removal, and Spent Polymer for Reduction of Permanganate: Multivariate Optimization

Preparation of silica-magnetite nanoparticle mixed hemimicelle sorbents for extraction of several typical phenolic compounds from environmental water samples

Towards elevated perfluorooctanoic acid (PFOA) enrichment in water: Sequential liquid-liquid extraction pretreatment for ion chromatography detection

In-situ targeted removal of naphthalene from groundwater by peroxymonosulfate activation using molecularly imprinted activated carbon: Efficacy, mechanism and applicability

Super facile one-step synthesis of aromatic amine waste residue derived N-rich porous carbon for hyper efficient p-nitrophenol adsorption