Abstract:Two dynamical models, the traditional method of moments coupled model (MCM) and Taylor-series expansion method of moments coupled model (TECM) for particle dispersion distribution and gravitation deposition are developed in three-dimensional ventilated environments. The turbulent airflow field is modeled with the renormalization group (RNG) k–ε turbulence model. The particle number concentration distribution in a ventilated room is obtained by solving the population balance equation coupled with the airflow field. The coupled dynamical models are validated using experimental data. A good agreement between the numerical and experimental results can be achieved. Both models have a similar characteristic for the spatial distribution of particle concentration. Relative to the MCM model, the TECM model presents a more close result to the experimental data. The vortex structure existed in the air flow makes a relative large concentration difference at the center region and results in a spatial non-uniformity of concentration field. With larger inlet velocity, the mixing level of particles in the room is more uniform. In general, the new dynamical models coupled with computational fluid dynamics (CFD) in the current study provide a reasonable and accurate method for the temporal and spatial evolution of particles effected by the deposition and dispersion behaviors. In addition, two ventilation modes with different inlet velocities are proceeded to study the effect on the particle evolution. The results show that with the ceiling ventilation mode (CVM), the particles can be better mixed and the concentration level is also higher. On the contrast, with the side ceiling ventilation mode (SVM), the particle concentration has an obvious stratified distribution with a relative lower level and it makes a much better environment condition to the human exposure.

Indoor Particulate Matter Transfer in CNC Machining Workshop and The Influence of Ventilation Strategies—A Case Study

Distribution of oil mist particles and air quality improvement in the working area of the cutting workshop

Numerical study on the integrated effects of supplied air velocity and exhaust velocity on particles removal for industrial buildings

Numerical Study of the Effect of Ventilation Pattern on Coarse, Fine, and Very Fine Particulate Matter Removal in Partitioned Indoor Environment

Influence of the purification system of machining factories on indoor air quality

Numerical Simulation on Flow Characteristics of PM2.5 in the Indoor Environment

Numerical simulation of bioaerosol deposition and mildew risk under transitional seasonal ventilation in workshop with wet source

Exposure levels of oil mist particles under different ventilation strategies in industrial workshops

Performance Evaluation for a Coupled Push–pull Ventilation and Air Curtain System to Restrict Pollutant Dispersion in a Factory Building

Particulate Pollution in Ventilated Space: Analysis of Influencing Factors.

The Influence of Ventilation Mode and Personnel Walking Behavior on Distribution Characteristics of Indoor Particles

Ventilation, Indoor Particle Filtration, and Energy Consumption of an Apartment in Northern China

Simulation of indoor cigarette smoke particles in a ventilated room

Influence of mechanical ventilation system on indoor carbon dioxide and particulate matter concentration

Influence of outdoor meteorological parameters on the indoor environment of blast furnace yard

Simulation of Particles Diffusion Characteristics in the Ventilation Duct of the Air Conditioning System

The Effects of Ventilation and Floor Heating Systems on the Dispersion and Deposition of Fine Particles in an Enclosed Environment

The influence of indoor thermal conditions on ventilation flow and pollutant dispersion in downstream industrial workshop

Diagnostics and Transformation of the Ventilation System of a Machining Workshop

Performance of three air distribution systems in VOC removal from an area source

CFD Modeling of Particle Dispersion and Deposition Coupled with Particle Dynamical Models in a Ventilated Room