Mechanical strength and porosity changes of bituminous coal induced by supercritical CO2 interactions: Influence of saturation pressure

Xianfeng Liu,Xueqi Jia,Wei Liu,Baisheng Nie,Chengpeng Zhang,Dazhao Song
DOI: https://doi.org/10.1016/j.geoen.2023.211691
2023-06-01
Geoenergy Science and Engineering
Abstract:Sequestration of CO2 in the geological formations has great potential to reduce greenhouse gas emissions, and the induced mechanical stability of coal reservoirs is deeply concerned with the long-term safety of CO2 geological storage. After injection, it is likely that CO2 is stored in the form of supercritical state in coal reservoirs. To date, our current knowledge is still lacking in the underlying interaction mechanisms between coal and supercritical CO2 (ScCO2) fluids under the influence of saturation pressure. In this work, ScCO2 saturation was performed on bituminous coal at the pressures from 7.5 to 25 MPa for saturation time up to 10 days. Mercury intrusion porosimetry (MIP), X-ray diffraction (XRD) and uniaxial compression measurements were conducted to evaluate the mechanical strength and microstructure changes of bituminous coal. The results indicate that coal pore structures are greatly changed by ScCO2 interactions, including the increase of pore volume (84.8–173.2%) and surface area (42.1–85.8%). The larger hysteresis effect is found in saturated specimens, illustrating that ScCO2 interactions enhance the pore roughness of coal. The carbonates in coal are sensitive to ScCO2 fluids, which are extensively dissolved during interactions. ScCO2 saturation pressure has significant impact on the mechanical properties of coal. Rapid reduction of mechanical strength (up to 35.6%) was identified when the pressure was increased from 7.5 to 15 MPa. Subsequently, limited further reduction (<9%) occurred as the saturation pressure is further increased up to 25 MPa. Mineral dissolution and porosity changes account for the mechanical degradation, which weakens the cementation degree and interaction force of coal matrix.
What problem does this paper attempt to address?