Abstract:International Journal of Modern Physics B, Ahead of Print. This research focuses on the sustainable optimization of the milling process for Titanium Alloy Ti-6Al-4V using Minimum Quantity Lubrication (MQL) assistance. This experimental research investigates the effects of cutting parameters and lubrication conditions on the surface roughness ([math]) and flank wear ([math]) in the milling process of Titanium Alloy Ti-6Al-4V. The study aims to evaluate the influence of cutting speed ([math]), feed rate ([math]) and depth of cut ([math]) on the selected machining performance indicators. The experiments were carried out using a DMG Mori Seiki DMU50 CNC center, and the workpiece samples were measured at [math]. Three different lubrication conditions were employed, including dry machining, conventional flood cooling and Minimum Quantity Lubrication (MQL) using peanut oil. The cutting parameters were varied based on a Taguchi L9 orthogonal array design to explore the main effects of each parameter on [math] and [math]. The results reveal that cutting speed ([math]) has the most significant influence on surface roughness, followed by feed rate ([math]), while the impact of depth of cut ([math] is negligible in comparison. Conversely, the coolant mode has the most significant impact on flank wear ([math]), followed by feed rate ([math]) and depth of cut ([math]), while the influence of cutting speed ([math] is relatively minor. Under the same cutting parameters, transitioning from dry machining to MQL led to a sharp decrease in [math] from 170 to 100[math][math]m, and it increased to approximately 145[math][math]m when switching to flood cooling. Additionally, increasing the feed rate from 0.02 to 0.06[math]mm/tooth reduced [math] from around 135 to 120[math][math]m, but it significantly rose to approximately 165[math][math]m when the feed rate was further increased. Furthermore, the application of MQL with peanut oil as a lubricant and coolant demonstrated improvements in surface finish and reduced tool wear compared to dry and conventional flood cooling. The MQL approach led to better machining performance with lower [math] and [math] values. Overall, this study provides valuable insights into the effects of cutting parameters and lubrication conditions on surface roughness and flank wear in the milling process of Titanium Alloy Ti-6Al-4V. The findings offer practical guidelines for optimizing machining conditions to achieve desired surface quality and extend tool life while considering the environmental benefits of employing MQL in the manufacturing process.

Taguchi Design Optimization of the CNC End Milling Process of AA6063 using Minimum Quantity Lubrication

Optimization of Process Parameters in CNC Turning of Aluminum 7075 Alloy Using L27 Array-Based Taguchi Method

Optimization of drilling process variables using taguchi technique for LM6 aluminium alloy

Machining comparison of aerospace materials considering minimum quantity cutting fluid: A clean and green approach

Multi-response optimization in face milling of EN-31 steel using analytical hierarchy process-based GRA

Process Parametric Optimization of CNC Vertical Milling Machine Using ANOVA Method in EN24

Optimal Design of Parameters for the Nanofluid/Ultrasonic Atomization Minimal Quantity Lubrication in a Micromilling Process

Multiple Performance Characteristics in the Application of Taguchi Fuzzy Method in Nanofluid/Ultrasonic Atomization Minimum Quantity Lubrication for Grinding Inconel 718 Alloys

Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method

A Study on the Effects of Hybridized Metal Oxide and Carbonaceous Nano-Cutting Fluids in the End Milling of AA6082 Aluminum Alloy

An experimental study on surface quality of Al6061-T6 in ultrasonic vibration-assisted milling with minimum quantity lubrication

Optimization Of Machining Parameters of CNC Milling Operation for Material Removal Rate and Surface Roughness on En-24 Steel Using Taguchi Method

Optimization of CNC-WEDM Parameters for AA2024/ZrB2 in situ Stir Cast Composites Using Response Surface Methodology with Desirability Function Technique

Machining parameter optimization for face milling operating in a vertical CNC milling machine using Taguchi design approach

Examination of Minimum Quantity Lubrication Performance in the Hard Turning of AISI/SAE 1060 High-Carbon Steel

Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: From mechanisms to application

High-speed machining parametric optimization of 15CDV6 HSLA steel under minimum quantity and flood lubrication

CNC turning process parameters optimization on Aluminium 6082 alloy by using Taguchi and ANOVA

Towards sustainable manufacturing: Multiple optimization of surface roughness [math], flank wear [math] in MQL-assisted milling of Titanium Alloy Ti-6Al-4V

Optimization of cutting parameters for surface roughness in ball end milling of aluminium epoxy using Taguchi method

Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication