Abstract:To date, despite advancements in the design of offshore wind turbines, the as-designed and identified as-built natural frequencies of offshore wind turbines still show discrepancies. These discrepancies are partially rooted in modelling uncertainties, as well as uncertain input parameters, related to e.g. aero-, fluid- or soil-structure interaction. The first objective of this article is to present a wind farm wide comparison of the first and second, modelled and identified, fore-aft natural frequencies for turbines in parked conditions for a wind farm located in the Belgian north sea. Secondly, the effect of different model parameters on the computed natural frequencies will be assessed using wind farm wide sensitivity studies, with the aim to describe the potential of each considered parametrization in reducing the discrepancy between modelled and measured resonance frequencies. The in-depth considered parametrizations are aimed at assessing the effect of the linearization of the p-y curves, soil stiffness, local scour as well as the mass of the rotor nacelle assembly, whereas results for wall thickness, marine growth, added mass coefficient and sea water level variations will be presented without further discussion. In order to perform this study, turbine specific finite element models have been prepared and verified based on detailed design documents; subsequently updated best-estimate soil data has been used to model the foundation for two different design scenarios. Furthermore, modal parameters have been identified for each turbine, based on vibration data collected in parked condition and state of the art operational modal analysis tools. The results show that the discrepancies between the modelled and identified first fore-aft natural frequencies could potentially be bridged by adjusting combination of the investigated parameters, whereas the discrepancies observed on the second natural frequency cannot be bridged by making changes to the investigated parameters. As such, future work will entail a more detailed investigation on modelling uncertainties.

Verification of sound modeling results for a wind energy project

A proposed method for measuring noise from wind farms for the purpose of determining compliance with applicable limits and the comparison of results to ISO 9613-2 predictions

Validation Of Acoustic Models Of Auditory Neural Prostheses

A new base of wind turbine noise measurement data and its application for a systematic validation of sound propagation models

Control of Large Wind Energy Converters for Aeroacoustic Noise Mitigation with Minimal Power Reduction

Energy enhancement through noise minimization using acoustic metamaterials in a wind farm

Studies on the Experimental Measurement of the Low-Frequency Aerodynamic Noise of Large Wind Turbines

Suitability Analysis of Selected Methods for Modelling Infrasound and Low-Frequency Noise from Wind Turbines

Wind farm noise prediction and auralization

Acoustic Emissions from Wind Turbine Blades

An inter-model comparison of parabolic equation methods for sound propagation from wind turbines

OC6 Phase I: Investigating the Underprediction of Low-Frequency Hydrodynamic Loads and Responses of a Floating Wind Turbine

A Feasibility Study to Reduce Infrasound Emissions from Existing Wind Turbine Blades Using a Biomimetic Technique

Farm wide sensitivity assessments of resonant frequencies of integrated offshore wind turbine finite element models

Noise Measurement of a Wind Turbine using Thick Blades with Blunt Trailing Edge

Resonance Phenomenon in A Wind Turbine System under Operational Conditions

Validation of Wind Resource and Energy Production Simulations for Small Wind Turbines in the United States

Validation of a modeling methodology for wind turbine rotor blades based on a full-scale blade test

Modeling Noise and Lease Soft Costs Improves Wind Farm Design and Cost-Of-Energy Predictions

Wind turbine sound propagation: Comparison of a linearized Euler equations model with parabolic equation methods

Noise Study Auralization of an Open-Rotor Engine