Abstract:NAND flash memory is widely used in various computing systems. However, flash blocks can sustain only a limited number of program/erase (P/E) cycles, which are referred to as the endurance. On one hand, in order to ensure data integrity, flash manufacturers often define the maximum P/E cycles of the worst block as the endurance of flash blocks. On the other hand, blocks exhibit large endurance variations, which introduce two serious problems. The first problem is that the error correcting code (ECC) is often over-provisioned, as it has to be designed to tolerate the worst case to ensure data integrity, which causes longer decoding latency. The second problem is the underutilized block's lifespan due to conservatively defined block endurance. Raw bit error rate (RBER) of most blocks have not arrived the allowable RBER based on the nominal endurance point, which implies that the conventional P/E cycle-based block retirement policies may waste large flash storage space. In this paper, to exploit the storage capacity of each flash block, we propose an RBER-aware lifetime prediction scheme based on machine learning technologies. We consider the problem that the model can lose prediction effectiveness over time and use incremental learning to update the model for adapting the changes at different lifetime stages. At run time, trained data will be gradually discarded, which can reduce memory overhead. For evaluating our purpose, four well-known machine learning techniques have been compared in terms of predictive accuracy and time overhead under our proposed lifetime prediction scheme. We also compared the predicted values with the tested values obtained in the real NAND flash-based test platform, and the experimental results show that the support vector machine (SVM) models based on our proposed lifetime prediction scheme can achieve as high as 95% accuracy for flash blocks. We also apply our proposed lifetime prediction scheme to predict the actual endurance of flash blocks at four different retention times, and the experimental results show that it can significantly improve the maximum P/E cycle of flash blocks from 37.5% to 86.3% on average. Therefore, the proposed lifetime prediction scheme can provide a guide for block endurance prediction.

Stop unnecessary refreshing: extending 3D NAND flash lifetime with ORBER

Leveraging Partial-Refresh for Performance and Lifetime Improvement of 3D NAND Flash Memory in Cyber-Physical Systems.

Exploiting Uncorrectable Data Reuse for Performance Improvement of Flash Memory

Near-Free Lifetime Extension for 3-D nand Flash via Opportunistic Self-Healing

Exploiting Process Variation for Retention Induced Refresh Minimization on Flash Memory.

RBER-Aware Lifetime Prediction Scheme for 3D-TLC NAND Flash Memory.

A High Precision Refresh Method to Improve the Performance of Flash Storage Devices

RBER Aware Multi-Sensing for Improving Read Performance of 3D MLC NAND Flash Memory

High-Precision Short-Term Lifetime Prediction in TLC 3-D NAND Flash Memory As Hot-Data Storage

PEAR: Unbalanced Inter-Page Errors Aware Read Scheme for Latency-Efficient 3D NAND Flash

LSB Page Refresh Based Retention Error Recovery Scheme for MLC NAND Flash

ApproxRefresh

Special Section on Privacy Computing: Principles and Applications

Bpm: A Bad Page Management Strategy for the Lifetime Extension of Flash Memory

Access Characteristic Guided Read and Write Regulation on Flash Based Storage Systems

Experimental Characterization, Optimization, and Recovery of Data Retention Errors in MLC NAND Flash Memory

Retention Trimming for Lifetime Improvement of Flash Memory Storage Systems

Improving the Reliability of MLC NAND Flash Memories Through Adaptive Data Refresh and Error Control Coding

SREA: A Self-Recovery Effect Aware Wear-Leveling Strategy for the Reliability Extension of NAND Flash Memory

Exploiting Error Characteristic to Optimize Read Voltage for 3-D NAND Flash Memory

Reducing LDPC Soft Sensing Latency by Lightweight Data Refresh for Flash Read Performance Improvement