Abstract:Multipass welding of high strength steels used for fabrication and joining of transmission pipelines presents a number of metallurgical challenges. A key concern is both the strength and toughness of the heat affected zone (HAZ) adjacent to both seam and girth welds. In this work, a systematic study has been conducted on regions of the heat affected zone in the base metal where the first welding pass produces a thermal excursion which results in a coarse-grained heat affected zone (CGHAZ). The subsequent weld pass involves intercritical annealing of this region, i.e. a microstructure associated with intercritically reheated coarse grain heat affected zone (ICCGHAZ). The small ICCGHAZ region is often identified as being particularly susceptible to crack initiation. This work was undertaken to understand microstructure development in this zone and how the ICCGHAZ may affect the overall performance of the HAZ. Gleeble thermomechanical simulations have been conducted to produce bulk samples representative of different welding scenarios. Charpy impact tests and tensile tests have been performed over a range of temperatures. It was found that when a continuous necklace of martensite-austenite islands form on the prior austenite grain boundaries (i.e. for a M/A fraction of ≈10%), the Charpy impact toughness energy is dramatically decreased and the ductile brittle transition temperature is significantly raised. Detailed studies on the secondary cracks have been conducted to examine the fracture mechanisms in the different microstructures. The results show that the lower bainite microstructures obtained after the 1st thermal treatment, representative of CGHAZ have excellent impact properties. The impact toughness of the microstructures typical of ICCGHAZ is strongly dependent on the composition as well as morphology and spatial distribution of the resulting martensite-austenite (M/A) islands transformed from inter-critically formed austenite. This zone can play a significant role in fracture initiation and thus needs to be considered in alloy and welding process designs.

Hardening mechanisms in a high wall thickness sour service pipe steel API 5L X65 before and after post-welding heat treatments

Post-Weld Heat Treatment of API 5L X70 High Strength Low Alloy Steel Welds

Toughness Recovery of Welded Pipe API 5L Grade B through Quenching and Tempering Treatment

Changes in microstructure and properties of weld heat-affected zone of high-strength low-alloy steel

The Effects of Post Weld Heat Treatment on Microstructure and Mechanical Properties of API X70 Linepipe using Submerged Arc Welding

Characterization of Mechanical Properties and Residual Stress in API 5L X80 Steel Welded Joints

Effect of heat treatment on the microstructure and mechanical properties of a low-carbon X80 pipeline steel

Mechanical Behaviour of Intercritically Reheated Coarse-Grained Heat Affected Zone in High Strength Line Pipe Steels

Effect of post-processing heat treatment on hydrogen embrittlement susceptibility of API 5L X70 pipeline steel

Simultaneously enhancing strength and fracture toughness via tailoring the microstructure in X80 girth weld metal

Effect of through-thickness microstructure inhomogeneity on mechanical properties and strain hardening behavior in heavy-wall X70 pipeline steels

Influence of Post-Weld Heat Treatment on Microstructure and Toughness Properties of 13MnNiMoR High Strength Low Alloy Steel Weld Joint

Effect of Microstructure on Mechanical Properties of X65MS Welded Pipe Joint

Strain-Hardening Properties of High Grade Line Pipes

Investigation into the Impact Toughness of API 5L X80 Steel Weldments and its Relationship with Safe Welding Procedures

Postweld Heat Treatment of 15Cr-6Ni-2Mo-1Cu Supermartensitic Stainless Steel Welds

Influence of preheating on API 5L-X80 pipeline joint welding with self-shielded flux-cored wire

Modeling Hardness Evolution during the Post-Welding Heat Treatment of a Friction Stir Welded 2050-T34 Alloy

Research of Micro-Alloyed Microstructure and Composition in X80 Pipeline Steel for High Heat Input Welding

FEATURES OF MICROSTRUCTURE FORMATION IN THE WELDED PIPE JOINTS DURING HIGH-FREQUENCY WELDING AND SUBSEQUENT LOCAL HEAT TREATMENT

The Effect of Heat Treatment Parameters on the Mechanical and Microstructural Properties of an ASTM A860 WPHY 65 Pipe Fitting: An Experimental Investigation