Abstract:The determination of the electrochemically active surface area (ECSA) of a catalyst layer (CL) of a non-precious metal catalyst is of fundamental importance in optimizing the design of a durable CL for anion exchange membrane (AEM) water electrolysis, but has yet to be developed. Traditional double layer capacitance (Cdl), measured by cyclic voltammetry (CV), is not suitable for the estimation of the ECSA due to the nonconductive nature of Ni-based oxides and hydroxides in the non-Faradaic region. This paper analyses the applicability of electrochemical impedance spectroscopy (EIS) compared to CV in determining capacitances for the estimation of the ECSA of AEM-based CLs in an aqueous KOH electrolyte solution. A porous electrode transmission line (TML) model was employed to obtain the capacitance–voltage dependence from 1.0 V to 1.5 V at 20 mV intervals, covering both non-Faradic and Faradic regions. This allows for the identification of the contribution of a NiFe-layered double hydroxide (LDH) catalyst and supports in a CL, to capacitances in both non-Faradic and Faradic regions. A nearly constant double layer capacitance (Qdl) observed in the non-Faradic region represents the interfaces between catalyst supports and electrolytes. The capacitance determined in the Faradic region by EIS experiences a peak capacitance (QF), which represents the maximum achievable ECSA in an AEMCL during reactions. The EIS method was additionally validated in durability testing. An approximate 30% loss of QF was noted while Qdl remained unchanged following an eight-week test at 1 A/cm2 constant current density, implying that QF, determined by EIS, is sensitive to and therefore suitable for assessing the loss of ECSA. This universal method can provide a reasonable estimate of catalyst utilization and enable the monitoring of catalyst degradation in CLs, in particular in liquid alkaline electrolyte water electrolysis systems.

On the use of a constant phase element (CPE) in electrochemistry

Revisiting cyclic voltammetry and electrochemical impedance spectroscopy analysis for capacitance measurements

Analysis of the Charging Current in Cyclic Voltammetry and Supercapacitor’s Galvanostatic Charging Profile Based on a Constant-Phase Element

Relationship between the Origin of Constant-Phase Element Behavior in Electrochemical Impedance Spectroscopy and Electrode Surface Structure

How microstructures, oxide layers, and charge transfer reactions influence double layer capacitances. Part 1: impedance spectroscopy and cyclic voltammetry to estimate electrochemically active surface areas (ECSAs)

Determination of Constant Phase Element Parameters under Cyclic Voltammetry Conditions Using a Semi-theoretical Equation

Seven steps to reliable cyclic voltammetry measurements for the determination of double layer capacitance

Calculation of a pure double-layer capacitance from a constant phase element in the impedance measurements

Differential capacitance of curved electrodes: role of hydration interactions and charge regulation

Understanding electrochemical capacitors with in-situ techniques

Decoupling Variable Capacitance and Diffusive Components of Active Solid-Liquid Interfaces with Flex Points

Impedance Spectroscopy and Cyclic Voltammetry to Determine Double Layer Capacitances and Electrochemically Active Surface Areas

Capacitance Determination for the Evaluation of Electrochemically Active Surface Area in a Catalyst Layer of NiFe-Layer Double Hydroxide for Anion Exchange Membrane Water Electrolyser

Dynamics and energetics of ion adsorption at the interface between a pure ionic liquid and carbon electrodes

Exploring Impact of Various Operating Parameters on the Specific Capacitance at the Glassy Carbon/H2SO4 Interface: A Comparative Analysis Using Electrochemical Characterization

Electrochemical impedance spectroscopy: from breakthroughs to functional utility in supercapacitors and batteries – a comprehensive assessment

Reevaluation of Performance of Electric Double-layer Capacitors from Constant-current Charge/Discharge and Cyclic Voltammetry

Simulating the charging mechanism of a realistic nanoporous carbon-based supercapacitor using a fully polarizable model

How Thermal Effect Regulates Cyclic Voltammetry of Supercapacitors

On the Parasitic Surface Adsorption of Pyrrolidinium and Phosphonium-based Ionic Liquids Preventing Accurate Differential Capacitance Measurements

Cyclic voltammetry signal analyses for equivalent electric circuits consisting of multiple resistors and capacitors