Abstract:Within the framework of the proposed research, emphasis was placed on application of magnetic fields to semiconductor growth systems. Through complementary support by the Air Force and DARPA, we were able to acquire a superconducting magnet which can provide axial magnetic fields of up to 30 kGauss for melt stabilization in the NASA facility for heat pipe based vertical BridgmanStockbarger growth. It was found that axial fields up to 3 kGauss do not affect the growth behavior nor the macro-segregation behavior in the system Ge(Ga). Applied fields are found to significantly alter the radial dopant distribution, which is attributed to alterations in the spatial orientation of convective cells. Increasing the applied magnet field to 30 kGauss is found to have a fundamental effect on dopant segregation. The initial transient segregation behavior is identical with that predicted by Tiller e t al. for diffusion controlled plane front solidification. Within the transient region, the dopant concentration increased by in excess of 600%, a concentration increase which in the magnitude has thus far only been observed in the ASTP experiment conducted in the reduced gravity environment of space. While the apparent achievement of diffusion controlled growth, as indicated by theory, is contingent on the validity of the available database, the experimental results demonstrate that magnetic melt stabilization can be valuable in emulating a limited spectrum of reduced gravity conditions. The experiments also point to the need, in space, for extended equilibration of melts prior to solidification, and alternatively, at the need for force convective mixing in a microgravity environment. . Emphasis was also place on the exploration of the potential of KC-135 flights for preliminary studies of the effects of reduced gravity environment on the wetting behavior of semiconductor systems in growth configuration. The experiments indicated different solidification characteristics; however, it was not possible to obtain quantitative data on wetting. The primary problem consisted of deficiencies of the available hardware. The limited number of experiments conducted does not permit any conclusions on the merits of KC-135 flights for semiconductor processing research. It is established, however, that the effective use of this facility will require acquisition of appropriate hard ware. At professional meetings, presentations were made on the potential of reduced gravity environment of R&D in materials processing. -49https://ntrs.nasa.gov/search.jsp?R=19890004306 2019-11-28T09:08:54+00:00Z

Heat Transfer in a Cylindrical Crucible with Liquid Metal in Its Alternate Exposure to Traveling and Rotating Magnetic Fields

Thermal mixing enhancement of liquid metal film-flow by various obstacles under vertical magnetic field

Direct numerical simulation of turbulent mixed convection in a vertical channel in a wall-normal magnetic field

Experimental Investigation on Liquid-Metal Flow Distribution in Insulating Manifold under Uniform Magnetic Field

Experimental investigation on magneto-convective flows around two differentially heated horizontal cylinders

Heat Flow Control and Segregation in Directional Solidification: Development of an Experimental and Theoretical Basis for Bridgman-Type Growth Experiments in a Microgravity Environment

Mhd Effect on Flow Structures and Heat Transfer Characteristics of Liquid Metal-Gas Annular Flow in A Vertical Pipe

Thermal Mixing Enhancement of Liquid Metal MHD Free-Surface Flow by Optimizing Vortex Generator Arrays

Development of magnetic liquid metal suspensions for magnetohydrodynamics

Performance Enhancement of Latent Thermal Energy System under Alternating Magnetic Field

Experimental investigation of liquid metal droplet flow affected by a time-dependent magnetic field

Direct Numerical Simulation of Unstable Stratified Turbulent Flow under a Magnetic Field

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

Flow regimes of Rayleigh–Bénard convection in a vertical magnetic field

Large-eddy simulation of magnetohydrodynamics and heat transfer in annular pipe liquid metal flow

Magnetohydrodynamic flows and heat transfer in a twin-channel induction heating tundish

Molten Steel Flow, Heat Transfer and Inclusion Distribution in a Single-Strand Continuous Casting Tundish with Induction Heating

The Transition from Wall Modes to Multimodality in Liquid Gallium Magnetoconvection

Numerical Simulation of Electromagnetic Phenomena and Solidification under a Pulsed Magnetic Field

Numerical and experimental analysis of magneto-convective flows around pipes

Heat Transfer Enhancement of Liquid Metal Thermal Convection Affected by the Seebeck Effect and Magnetic Field