Abstract:Quick drying after water or sweat absorption is an important function of underwear. In this study, the hydroxy groups of cotton knitted fabrics (CFs) were partially acetylated, maintaining the original fabric structure. The following three heterogeneous acetylation processes were used: Ac-I (Ac 2 O/H 2 SO 4 /toluene), Ac-II (Ac 2 O/H 2 SO 4 /AcOH/water), and Ac-III (Ac 2 O/AcONa) systems (Ac 2 O, acetic anhydride; AcOH, acetic acid; AcONa, sodium acetate). Acetylated cotton knitted fabrics (AcCFs) with degree of substitution ( DS ) ≤ 0.5 and yields of > 80% were prepared. AcCFs prepared with the Ac-III system gave high degree of polymerization ( DP ) values of > 1500, whereas those prepared with the Ac-II system exhibited low DP values of ≤ 400. The moisture contents of AcCFs at 20 °C and 65% relative humidity decreased from 7.1 to 4.7% with increasing DS value up to 0.46; introducing hydrophobic acetyl groups into the CFs decreased their hydrophilic nature. Quick drying similar to that of a polyester fabric was achieved for some of the AcCFs with DS values of < 0.2. When the acetyl groups in the AcCFs were homogeneously distributed across each fiber width (achieved for AcCFs prepared with the Ac-II system), quick drying was evident in the AcCFs. The crystallinities and crystal widths of cellulose I for the AcCFs with DS values of ≤ 0.28 were almost unchanged compared with those of the original CFs. However, neither the crystallinities nor crystal widths of cellulose I were directly related to quick drying after water absorption. Thermal degradation of the AcCFs varied between the acetylation systems, and depended on the DP values and/or the presence of sulfate ester groups in the AcCFs.

Effect of drying pretreatment on the acetylation of nanofibrillated cellulose

Preparation and Characterization of Nanofibrillated Cellulose from Bamboo Fiber Via Ultrasonication Assisted by Repulsive Effect

The Surface Modification of Nanocrystalline Cellulose

Silane modification of nanofibrillated cellulose and its effect on the properties of waterborne acrylic resin

Stability enhancement of nanofibrillated cellulose in electrolytes through grafting of 2-acrylamido-2-methylpropane sulfonic acid

Hydrophobicity Enhancement of Cellulose-Based Material Via Heterogeneous Surface Acetylation

Preparation, compatibility and structure of acetylated cellulose/lyocell composite fiber

Effect of hemicellulose hydrolysate addition on the dehydration and redispersion characteristic of cellulose nanofibrils

Base-free trifluoroacetylation: From methyl glucopyranoside to cellulose nanofibers

Study on Treating with Acid and Surface Modification by Acetic Anhydride for Cellulose

Sustainable Preparation and Characterization of Thermally Stable and Functional Cellulose Nanocrystals and Nanofibrils Via Formic Acid Hydrolysis

Impact of Dimethyl Sulfoxide Treatment on Morphology and Characteristics of Nanofibrillated Cellulose Isolated from Corn Husks

Methacrylate and polymer grafting pulp pretreatments reduce refining energy to produce modified cellulose nanofibrils

Effect of fiber drying on properties of lignin containing cellulose nanocrystals and nanofibrils produced through maleic acid hydrolysis

Improved dispersibility of nanofibrillated cellulose via simple microwave-assisted esterification

Aqueous Polymer Modification of Cellulose Nanofibrils by Grafting‐Through a Reactive Methacrylate Group

Hyrophobization of nanofibrillated cellulose from macaranga gigantea for binding of curcumin

Acetylation of cotton knitted fabrics for improved quick drying after water absorption

A facile approach for preparing nanofibrillated cellulose from bleached corn stalk with tailored surface functions

Tailoring nanofibrillated cellulose through sonication and its potential use in molded pulp packaging

Evaluating paper’s optical properties after separate and combined use of nanofibrillated cellulose with cationic starch and cationic polyacrylamide