Abstract:A novel, easily controllable, and energy saving method, suitable for industrial production of all-cellulose composites (ACCs) from cotton linters, was proposed by solely controlling the dissolution temperature of a sodium hydroxide/urea aqueous solvent. A series of ACCs were prepared from dissolution temperatures of −2, −4, −6, −8, −10, and −12.5 °C. The morphologies of cellulose solutions were observed with an optical microscope. The effects of the dissolution temperature on structures and properties of ACCs were characterized by Fourier transform infrared spectroscopy, optical microscopy, scanning electron microscopy, X-ray diffraction, ultraviolet–visible spectroscopy, thermogravimetric analysis, and tensile tests. The ACCs prepared at −10 °C exhibited the highest mechanical strength among all the ACCs, with a tensile strength and Young's modulus of 108.1 MPa and 4.8 GPa, respectively, much higher than the corresponding values of 51.4 MPa and 3.5 GPa for the pure regenerated cellulose films prepared at −12.5 °C. The ACCs prepared at −10 °C also exhibited better transparency and good thermal stability as a result of the uniform and dense structures.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.9b07075?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.9b07075</a>.Effects of dissolution time on the mechanical properties of ACCs-10, XRD profiles of ACCs-10 and the corresponding peak deconvolution process, and comparison of tensile strength of the ACCs prepared by different methods (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.9b07075/suppl_file/ie9b07075_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation, compatibility and structure of acetylated cellulose/lyocell composite fiber

Regulating Effect of Hemicelluloses on the Preparation and Properties of Composite Lyocell Fibers

Acetylated Cellulose Nanofibers Fabricated Through Chemo-Mechanical Process for Stabilizing Pickering Emulsion

Surface Acetylation of Cellulose Nanowhiskers and Its Reinforcing Function in Cellulose Acetate

Hydrophobicity Enhancement of Cellulose-Based Material Via Heterogeneous Surface Acetylation

Cellulose triacetate from different sources: modification assessment through thermal and chemical characterization

Role of low-concentration acetic acid in promoting cellulose dissolution

Cellulose Fiber with Enhanced Mechanical Properties: The Role of Co-Solvents in Gel-like NMMO System

Holocellulosic Fibers and Nanofibrils Using Peracetic Acid Pulping and Sulfamic Acid Esterification

Preparation and characterization of hemicellulosic derivatives containing carbamoylethyl and carboxyethyl groups.

Production of Cellulose Nano-Fibers and Its Application in Poly-Lactic-Acid: Property Improvement by New Types of Coupling Agents

Poly(acrylic acid)/poly(ethylene glycol) adduct for attaining multifunctional cellulosic fabrics

Structure and Properties of All-Cellulose Composites Prepared by Controlling the Dissolution Temperature of a NaOH/Urea Solvent

Sustainable Preparation and Characterization of Thermally Stable and Functional Cellulose Nanocrystals and Nanofibrils Via Formic Acid Hydrolysis

Tailoring the Holocellulose Fiber/Acrylic Resin Composite Interface with Hydrophobic Carboxymethyl Cellulose to Enhance Optical and Mechanical Properties

Defibrillation and functionalization of cellulose fibers from different sources in one-step via a mechanochemical method

Textile finishing for bacterial cellulose modification: organic acid-catalyzed cellulosic acetylation

Optimizing crystal transitions in low-temperature, low-concentration NaOH solutions to prepare cellulose I and II composite materials

Comparison Of Preparation, Characterizations Of Carbamoylethyl Hemicelluloses In Different Media

An Efficient Method for the Synthesis of Hemicellulosic Derivatives with Bifunctional Groups in Butanol/water Medium and Their Rheological Properties

Asymmetric ionic bond shielding encountering with carboxylate capturing metal ions for enhancing the flame retardant durability of regenerated cellulose fibers