Abstract:Since the available ambient power level is usually quite low for radio frequency energy harvesting, it is very desirable for an antenna to have both a high gain and a wide beamwidth. Usually, they cannot be achieved simultaneously. In order to overcome this limitation, a multi-port antenna using a nonuniform metasurface (MTS) is presented. In this MTS-based antenna, three modes with complementary radiation patterns are excited through one middle and two side aperture-coupled feeding ports. The first mode is the fundamental TM10 mode with in-phase current distributions on the MTS. It has a broadside directional radiation pattern with a high gain. The second and third modes are symmetrical to each other at a high mode. They have opposite current distri-butions on two sides of the MTS. These two modes have a directional radiation pattern with a tilted angle. These three modes share the same aperture but are excited by three different feeds. Each feed is connected to a rectifier. By combining direct current (DC) output to a single load, an antenna with a wide beam and a high gain can be effectively achieved, although each mode has the usual limitation of gain and beamwidth. The key advantage of this proposed rectenna is that the unit cells on the MTS layer can be reused to excite different MTS modes with different radiation patterns simultaneously. Thus, a wide beamwidth can be achieved. Three realized beams are oriented at - 35 degrees, 0 degrees, and + 35 degrees respectively. By combining the DC output from the three modes, the proposed rectenna has effectively achieved a beamwidth of 114 degrees with a gain ranging from 8 to 9.8 dBi. The RF-to-DC conversion efficiency of the rectifiers is 3%-67% at 2.45 GHz when the input power ranges from-35 to 0 dBm. The proposed MTS antenna with an overall size of lambda 0 x lambda 0 x 0.03 lambda 0 can achieve 12% fractional bandwidth.

A hybrid solar‐RF energy harvesting system based on tree‐shaped antenna array

High-Efficiency 2-D Multibeam Rectenna Based on Gain Enhanced Patch Array

A hybrid solar and RF energy harvester for applications of self-Powered wireless sensor nodes

Hybrid Energy Harvester Based on Dual Band Transparent Dielectric Resonator Antenna

A Dual-Polarized Omnidirectional Rectenna Array for RF Energy Harvesting

Flexible and Wearable Hybrid RF and Solar Energy Harvesting System

A High-Gain Rectenna Based on Grid-Array Antenna for RF Power Harvesting Applications

CP Antenna with 2 × 4 Hybrid Coupler for Wireless Sensing and Hybrid RF Solar Energy Harvesting

A hybrid energy supply system based on metamaterial antenna integrated solar cells for IoT nodes

Dual-Polarized and Multi-Beam Cross-Mesh Array Antenna for RF Energy Harvesting Applications

A novel high-efficiency portable integrated system for synergistic harvesting of radio frequency and soil energy

A Compact Rectenna with Flat-Top Angular Coverage for RF Energy Harvesting

Grid-Array Rectenna with Wide Angle Coverage for Effectively Harvesting RF Energy of Low Power Density

Dual-Band Antenna And High Efficiency Rectifier For Rf Energy Harvesting System

Integrated Solar Mesh Dipole Antenna Based Energy Harvesting System

Rectenna System Development Using Harmonic Balance and S-Parameters for an RF Energy Harvester

A Multifunctional Antenna Array Applied in WPT System

Aperture Sharing Metasurface-Based Wide-Beam Antenna for Energy Harvesting

A Novel Rectenna Array with RBR for Long-Distance WLAN Energy Harvesting System

Quad-Band Rectenna for Ambient Radio Frequency (RF) Energy Harvesting

Design of a Closely-Spaced-element Rectenna for Low-Power Wireless Energy Harvesting