Abstract:Dyes used in textiles, foods, cosmetics, and chemicals have become a major environmental pollution issue around the world. To address this issue, a number of technologies have been created to remove these pollutants from the environment. Due to their superior properties at nanoscale, numerous nanomaterials have been applied to remove dyes from polluted waters. This research presents the findings of the development of bentonite nano zero-valent iron (B-nZVI) for the treatment of synthetic cationic dyes. This study has three objectives: (i) to produce bentonite nano zero-valence iron (B-nZVI), (ii) to characterize its adsorbents (B-nZVI), (iii) to characterize its adsorption capacity. Four main tests were used for this purpose: (i) a physical test (Brunauer–Emmett–Teller (BET) surface area), (ii) a chemical test (cation exchange capacity (CEC) and X-ray fluorescence (XRF)), (iii) morphology (field emission scanning electron microscopy (FESEM) and (iv) mineralogy (Fourier transform infrared spectroscopy (FTIR). The five factors for the batch equilibrium test are adsorbent dose, concentration, kinetic, pH, and temperature. The batch test showed that the optimum dose for all adsorbents is 0.5 g. For the concentration factor, B-nZVI exhibits larger adsorption capacity (KL = 30,314.0536 L/g; R2 = 1) compared to bentonite (Kd = 0.0219 L/g; R2 = 0.8892). The kinetic factor showed that the adsorption capacity by pseudo-second-order model was the best for both adsorbents (qe = 1.2038 mg/g, R2 = 0.9993 for bentonite and qe = 6.9979 mg/g, R2 = 1 for B-nZVI). For B-nZVI, the interparticle diffusion model (Kf = 0.8645 m2 g−1 min L−1; R2 = 0.9) and intraparticle diffusion model (Kd = 2.3829 m2 g−1 min L−1; R2 = 0.9189) showed a good correlation with the adsorption data, while bentonite showed a lower correlation with the interparticle diffusion model (Kf = 0.0002 m2 g−1 min L−1; R2 = 0.6253) and intraparticle diffusion model (Kd = 0.2886 m2 g−1 min L−1; R2 = 0.6026), respectively. The pH factor showed that the adsorption capacity of bentonite (qe = 0.5674 mg/g) and B-nZVI (qe = 5.3284 mg/g) was highest in acidic conditions (pH 2). As for the temperature factor, there was no significant effect on bentonite and B-nZVI. Therefore, tests can be conducted at room temperature, saving energy. It was also concluded that B-nZVI is the best material for removing MB compared to bentonite and can be considered for the treatment materials of contaminated water.

Synthesis of nanoscale zero-valent iron doped carbonized zeolitic imidazolate framework-8 for methylene blue removal in water

Utilization of Zeolite Imidazolate Framework As an Adsorbent for the Removal of Dye from Aqueous Solution

New Insight into the Mechanism for the Removal of Methylene Blue by Hydrotalcite-Supported Nanoscale Zero-Valent Iron

Characteristics and Mechanisms of 4A Zeolite Supported Nanoparticulate Zero-Valent Iron As Fenton-like Catalyst to Degrade Methylene Blue

Synthesis of zeolitic imidazole framework‐8 derived ZnCo layered double hydroxides for the removal of methylene blue from wastewater

Efficient Removal of Methylene Blue by Fenton-Like Reaction Using Nzvi/Gac Composite As Catalyst

High-efficient removal of methylene blue by zirconium-based organic frameworks modified with 1,3,5-benzenetricarboxylic acid: Characterization, performances, and mechanisms

Controllable Synthesis and Adsorption Mechanism of Flower-Like MoS2/g-C3N4 Nanocomposites for the Removal of Methylene Blue in Water

Removal of Methylene Blue by Granitic Residual Soil Supported Nano Zero Valent Iron (Gr-nZVI): Kinetic and Equilibrium Studies

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Adsorption of Methylene Blue by Bentonite Supported Nano Zero Valent Iron (B-nZVI)

Novel synthesis of nanoscale zero-valent iron from iron ore tailings and green tea for the removal of methylene blue

Agarose‐sodium alginate hydrogel beads enhanced with zeolitic imidazolate frameworks/multiwalled carbon nanotubes nanoparticles for efficient adsorption and selective separation of methylene blue

Preparation of Carbon nitride/Carbon dots/4A molecular sieve composite and evaluation of adsorption performance for Methylene Blue

Removal of Crystal Violet and Methylene Blue from Aqueous Solutions Using the Fly Ash-Based Adsorbent Material-Supported Zero-Valent Iron

Synthesis, characterization, adsorption properties and mechanism of gravity-assisted zirconium alginate hydrogel fiber for removal of methylene blue from water

Green Synthesis of Nano-Zero-Valent Iron Using Ricinus Communis Seeds Extract: Characterization and Application in the Treatment of Methylene Blue-Polluted Water

Mechanistic Insights into Selective Adsorption and Separation of Multi-Component Anionic Dyes Using Magnetic Zeolite Imidazolate Framework-67 Composites

Synthesis and Characterization of Magnetic Fe3O4/Zeolite NaA Nanocomposite for the Adsorption Removal of Methylene Blue Potential in Wastewater Treatment

Synthesis of Zeolite/hydrous Metal Oxide Composites from Coal Fly Ash As Efficient Adsorbents for Removal of Methylene Blue from Water

Zero-valent iron supported-lemon derived biochar for ultra-fast adsorption of methylene blue