Abstract:CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x , hybrid perovskites thin films were grown on glass substrates employing spin-coating technique at different rotational speeds varying from 1000 to 2000 rpm. All the films exhibited a polycrystalline tetragonal structure with a preferred (110) orientation. For each rotational speed, the CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x films had approximately the same order of the absorbance in the visible region of solar spectrum. The current–voltage measurements of the CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x films showed a ferroelectric hysteresis behavior in the dark which it becomes Ohmic under the illumination indicating the microstructural improvement. The all samples were strongly resistive in the dark, and their electrical conductivity improving thousands of times under the illumination; it had varied in the ranges 25.5 × 10 –3 ‒206.61 (Ω cm) –1 and 82.81 × 10 –3 ‒689.47 (Ω cm) –1 for CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x , respectively. Our results demonstrated that the 1000 and 2000 rpm were optimal parameters for CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x films preparation, respectively. Moreover, the addition of the chlorine in CH 3 NH 3 PbI 3 films improves their physico-chemical properties. Indeed, compared to the CH 3 NH 3 PbI 3 prepared at 1000 rpm, the CH 3 NH 3 PbI 3– x Cl x film synthesized at 2000 rpm had the thinner thickness 571.58 nm, largest crystallite size 204.81 nm, lesser dislocation density 2.38 × 10 –5 lines nm –2 , superior quality of surface morphology, higher band gap 1.53 eV, lower Urbach energy 276.23 meV, higher refractive index 2.96, higher electrical conductivity in the dark 82.81 × 10 –3 (Ω cm) –1 and under the illumination 689.47 (Ω cm) –1 . CH 3 NH 3 PbI 3– x Cl x thin film synthesized at 2000 rpm has better quality that might be more suitable as a light absorbers films for photovoltaic cells and optoelectronic devices.

Comparative Study on the Role of Different Precursor Salts on Structural, Morphological, and Optoelectronic Characteristics of CH3NH3PbCl3 Perovskite Semiconductor: An Experimental Study

High Quality Hybrid Perovskite Semiconductor Thin Films with Remarkably Enhanced Luminescence and Defect Suppression via Quaternary Alkyl Ammonium Salt Based Treatment

Crystallization of CH3NH3PbI3-xBrx perovskite from micro-droplets of lead acetate precursor solution

Investigation of Physico-Chemical Properties of CH3NH3PbI3 and CH3NH3PbI3–xClx Hybrid Perovskites Thin Films for Photovoltaic and Optoelectronic Applications: A Comparative Study

Lead Replacement in CH3NH3PbI3 Perovskites

Enhanced performance of CH3NH3PbI3 perovskite solar cells by excess halide modification

Structural, electronic, and optical study of lead-free perovskite CH3NH3SnBr3 under compressive strain using DFT and DFT+U

First-Principles Calculations to Investigate the Mechanical Structure and Optical Properties of Lead Halide Perovskite CH3NH3PbI3

The Role of Chlorine in the Formation Process of “ch3nh3pbi3‐xclx” Perovskite

Enhanced Performance and Stability of Ambient-Processed CH3NH3PbI3-x(SCN)x Planar Perovskite Solar Cells by Introducing Ammonium Salts

Effect of Mn2+doping and DDAB-assisted postpassivation on the structural and optical properties of CsPb(Cl/Br)3halide perovskite nanocrystals

Controlled Crystallization of CH3NH3PbI3 Films for Perovskite Solar Cells by Various PbI2(X) Complexes

Electronic structures, spectroscopic properties, and thermodynamic characterization of sodium- or potassium-incorporated CH3NH3PbI3 by first-principles calculation

Structural, Mechanical, and Optoelectronic Properties of CH3NH3PbI3 as a Photoactive Layer in Perovskite Solar Cell

Morphology and surface analyses for CH3NH3PbI3 perovskite thin films treated with versatile solvent-antisolvent vapors

The Structural, Electronic, And Optical Properties Of Organic-Inorganic Mixed Halide Perovskites Ch3nh3pb(I1-Yxy)(3) (X = Cl, Br)

Effects of Precursor Ratios and Annealing on Electronic Structure and Surface Composition of CH3NH3PbI3 Perovskite Films

Effect of Excess PbBr2 on Photoluminescence Spectra of CH3NH3PbBr3 Perovskite Particles at Room Temperature

The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells

Effect on the Morphology and Optical Properties of Ch3nh3pbi3 with Additive of Nh4cl

Optimization of the Photoelectric Properties and Photo-Stability of CH3NH3PbBrXI3-X Films for Efficient Planar Perovskite Solar Cells