Abstract:CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x , hybrid perovskites thin films were grown on glass substrates employing spin-coating technique at different rotational speeds varying from 1000 to 2000 rpm. All the films exhibited a polycrystalline tetragonal structure with a preferred (110) orientation. For each rotational speed, the CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x films had approximately the same order of the absorbance in the visible region of solar spectrum. The current–voltage measurements of the CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x films showed a ferroelectric hysteresis behavior in the dark which it becomes Ohmic under the illumination indicating the microstructural improvement. The all samples were strongly resistive in the dark, and their electrical conductivity improving thousands of times under the illumination; it had varied in the ranges 25.5 × 10 –3 ‒206.61 (Ω cm) –1 and 82.81 × 10 –3 ‒689.47 (Ω cm) –1 for CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x , respectively. Our results demonstrated that the 1000 and 2000 rpm were optimal parameters for CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x films preparation, respectively. Moreover, the addition of the chlorine in CH 3 NH 3 PbI 3 films improves their physico-chemical properties. Indeed, compared to the CH 3 NH 3 PbI 3 prepared at 1000 rpm, the CH 3 NH 3 PbI 3– x Cl x film synthesized at 2000 rpm had the thinner thickness 571.58 nm, largest crystallite size 204.81 nm, lesser dislocation density 2.38 × 10 –5 lines nm –2 , superior quality of surface morphology, higher band gap 1.53 eV, lower Urbach energy 276.23 meV, higher refractive index 2.96, higher electrical conductivity in the dark 82.81 × 10 –3 (Ω cm) –1 and under the illumination 689.47 (Ω cm) –1 . CH 3 NH 3 PbI 3– x Cl x thin film synthesized at 2000 rpm has better quality that might be more suitable as a light absorbers films for photovoltaic cells and optoelectronic devices.

The Role of Chlorine in the Formation Process of “ch3nh3pbi3‐xclx” Perovskite

The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells

Elucidating the role of chlorine in perovskite solar cells

Effect on the Morphology and Optical Properties of Ch3nh3pbi3 with Additive of Nh4cl

Growth and Evolution of Solution-Processed CH3NH3PbI3-xClx Layer for Highly Efficient Planar-Heterojunction Perovskite Solar Cells

CH3NH3PbIxCl(3−x) Thin Film Prepared by Vapor Transfer Method for Perovskite Solar Cells

Phase Engineering of Perovskite Materials for High-Efficiency Solar Cells: Rapid Conversion of CH3NH3PbI3 to Phase-Pure CH3NH3PbCl3 Via Hydrochloric Acid Vapor Annealing Post-Treatment

The Structural, Electronic, And Optical Properties Of Organic-Inorganic Mixed Halide Perovskites Ch3nh3pb(I1-Yxy)(3) (X = Cl, Br)

Identification and Characterization of a New Intermediate to Obtain High Quality Perovskite Films with Hydrogen Halides As Additives

DFT analysis and FDTD simulation of CH3NH3PbI3-xClx mixed halide perovskite solar cells: role of halide mixing and light trapping technique

Reproducible One-Step Fabrication of Compact MAPbl(3-x)Cl(x) Thin Films Derived from Mixed-Lead-Halide Precursors

Elucidating the Band Structure and Free Charge Carrier Dynamics of Pure and Impurities Doped CH3NH3PbI(3-x)Cl(x) Perovskite Thin Films.

Unraveling the Impact of Halide Mixing on Perovskite Stability.

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Enhanced efficiency of perovskite solar cells by introducing controlled chloride incorporation into MAPbI3 perovskite films

Investigation of Physico-Chemical Properties of CH3NH3PbI3 and CH3NH3PbI3–xClx Hybrid Perovskites Thin Films for Photovoltaic and Optoelectronic Applications: A Comparative Study

CH3NH3PbI3 and CH3NH3PbI3–xClx in Planar or Mesoporous Perovskite Solar Cells: Comprehensive Insight into the Dependence of Performance on Architecture

Optoelectronic Evolution in Halogen-Doped Organic–Inorganic Halide Perovskites: A First-Principles Analysis

Cl alloying improves thermal stability and increases luminescence in iodine-rich inorganic perovskites

Revealing the stability and efficiency enhancement in mixed halide perovskites MAPb(I$_{1-x}$Cl$_x$)$_3$ with ab initio calculations

Crystallization of CH3NH3PbI3-xBrx perovskite from micro-droplets of lead acetate precursor solution