Synthesis of Methane Hydrate in Porous Media Using the «Water Memory» Effect

D. A. Bakulin,V. A. Lyubimenko,I. V. Khamidullina,A. P. Semenov,V. N. Khlebnikov,,,,,
DOI: https://doi.org/10.32935/1815-2600-2022-142-5-28-36
2022-01-01
Oil and Gas technologies
Abstract:The «memory (melt) water» effect accelerates the synthesis of methane hydrate in low-clay and clay porous media. The duration of the «memory» effect of water at 22-24°C is at least 3 days. The main factors determining the rate of methane hydrate synthesis in a porous medium when using the «water memory» effect are the degree of excess methane pressure and/or a decrease in temperature relative to the equilibrium values for methane hydrate. Inporous media made of quartz (river) sand, when the methane pressure exceeds the equilibrium value by 1.4 times or more and/or at a temperature below the equilibrium value by 3°C or more, the induction period of methane hydrate synthesis is minimal and does not depend on the degree of deviation from the equilibrium parameters. There was no effect of permeability, water saturation and wettability of the rock on the synthesis of methane hydrate in a permeable porous medium from river sand using the «water memory» effect. The conversion of ~10% of residual water into gas hydrate in the clay model of the Turonian horizon formation led to a decrease in gas permeability. Clay particles in the rock significantly reduce the methane/water ratio in the hydrate, i.e. in clay cores, the main amount of water is not part of the hydrate. Filtration of methane through a porous medium contributes to the formation of gas hydrate. If the synthesis of methane hydrate is stopped under static conditions, the process resumes in the gas stream.
What problem does this paper attempt to address?