Abstract:The central deformation extent of the thick plate can be improved and the approaching uniform deformation will be realized by the snake/gradient temperature rolling (SGTR). At present, the existing rolling force analytical models cannot be directly used for SGTR because of the great difference with the synchronous rolling. The rolling force model should be established so as to meet the production demand of the SGTR with different roll diameters. The thick plate is divided into three layers according to the numerical results of the short-term ultra-fast cooling for the thick plate. The deformation region is simplified into different zones and layers according to the temperature gradient and neutral point position. The traditional von Mises yield criterion was optimized by the introduced coefficients c1 and c2 according to the slip line field theory to correct the deviation caused by the uniform and shear stress assumption. The specific pressure equation is established by the slab method. The deformation region with different composition cases is analyzed, and the rolling force and torque analytical models are established according to the boundary conditions on this basis. The short-term ultra-fast cooling and rolling process were simulated by ANSYS software. The deformation resistance gradient produced by short-term ultra-fast cooling and roll diameter ratio are the main factors to affect the rolling force, while the roll offset has little effect on the rolling force because of its small proportion in the deformation region. The position of neutral points not only affects the rolling torque, but also changes its direction in certain conditions. The model precision was analyzed, and the rolling force calculated by the established analytic model is in good agreement with the numerical method, which serves as a theoretical basis for the rolling mill design and process parameter setting.

Deformation resistance prediction of tandem cold rolling based on grey wolf optimization and support vector regression

Data-driven width spread prediction model improvement and parameters optimization in hot strip rolling process

Accurate prediction algorithm of rolling force in slab gradient temperature rolling process

Influence of rolling force optimization on thickness accuracy of 20-high cold-rolling mill of silicon steel

An industrial IoT-based deformation resistance prediction and thickness control method of cold-rolled strip in steel production systems

Rolling force prediction during FGC process of tandem cold rolling based on IQGA-WNN ensemble learning

Degradation Modeling and RUL Prediction of Hot Rolling Work Rolls Based on Improved Wiener Process

Calculation and analysis of rolling force during aluminum alloy thick plate snake/gradient temperature rolling with different roll diameters

Prediction of Mechanical Properties of Aluminium Alloy Strip Using the Extreme Learning Machine Model Optimized by the Gray Wolf Algorithm

Research on deformation uniformity control of thin-walled conical aeroengine forgings based on GA-SVR

High Dimensional Data-driven Optimal Design for Hot Strip Rolling of C–Mn Steels

An improved method for calculating roll deformation of six-high rolling mill: enhances computation speed and accuracy

Prediction and analysis of rolling process temperature field for silicon steel in tandem cold rolling

Learning to Predict Metal Deformations in Hot-Rolling Processes

Research on the Prediction of Roll Wear in a Strip Mill

Enhanced predictive modeling of hot rolling work roll wear using TCN-LSTM-Attention

Application of the gradient boosting decision tree in the online prediction of rolling force in hot rolling

Prediction of mechanical properties of cold rolled strip based on improved extreme random tree

Adaptive Pass Scheduling for Roughness Control in Cold Rolling

Cold rolling force model of nuclear power zirconium alloy based on Particle Swarm Optimization

Numerical Prediction of Microstructure Evolution of Small-Diameter Stainless Steel Balls during Cold Skew Rolling