Abstract:In this study, we investigated the effect of organo silane monomer on the adhesion strength and corrosion protection of the water-reducible alkyd coatings. For this purpose, firstly, alkyd resin was synthesized and modified with acrylic monomers by changing organo silane monomer content in the range of 4–16 wt% in all acrylic monomer compositions. Then, the carboxyl groups on the hybrid resins were neutralized with a base and the coating recipes were formulated using these water-reducible resins. The chemical structure and composition of the synthesized polymers were confirmed using 1 H-NMR and FTIR spectroscopies. Mechanical properties of coatings applied on the cold-rolled steel surfaces were investigated via crosshatch adhesion, pendulum hardness, gloss, impact, and conical mandrel bend tester. According to the results, it can be said that water-reducible acrylic-modified alkyd coatings offer a good balance of hardness and flexibility. Then, the line was scratched parallel to the coating system and the surface coating properties of the coated panels, such as the adhesion strength after being exposed to humidity and corrosion resistance, were comparatively investigated. The best results for corrosion resistance and adhesion strength were obtained with the coating which was formulated with the resin having organo silane monomer of 8 wt% in all acrylic monomer mixtures. As the organo silane monomer amount increased to 16 wt%, the coatings' corrosion resistance and adhesion strength decreased. As a result, it was observed that organo silane modification is significantly effective in improving the adhesion strength and corrosion resistance of water-reducible alkyd coatings. However, increasing the amount of silane monomer may reverse the positive results obtained. This study also reveals significant results about the correlation between the adhesion strength and corrosion resistance of coatings by presenting visual results.

Formulation of Drying and Non Drying Oil Alkyd Resin from Palm Oil (Elaesis guineensis jacq.) and Tuna Fish Oil (Thunnus sp.) toward Acid Number Value and Non Volatile Content as Surface Coating Resin

Preparation of Fatty Acid Methyl Ester Catalyzed by Solid Acid from By- Products of Plam Oil

Preparation of Waterborne Alkyd Resin and Its Properties

Esterification of Palm Oil Deodorized Distillate by Cation Exchange Resin Catalyst

Preparation and Properties of Waterborne Air Drying Alkyd Resin

Formulating of Recipe of Self-Drying Water-Soluble Alkyd Resin

Valorisation of Salvia Hispanica L. (Chia) Oil into Air-Drying Alkyd Resins: Towards Solvent-Free Nanodispersion Formulations and Their Oxidative Miniemulsion Polymerisation

Stability and Film Properties of Tung Oil Modified Soybean Alkyd Emulsion

Synthesis and characterizations of high oil length alkyd resin with dehydrated castor oil and acrylic pimaric acid

Esterification of High-Acid Value Oil

Formulation of Heat Resistant Paint from Palm Oil Based Resin by Using Nano-Silica Particles

Waterborne hybrid (alkyd/styrene acrylic) emulsion polymers and exterior paint applications

The potential utilization of coconut oil and palm oil as raw material of alkanolamide under alkaline conditions

Development of jatropha curcas oil based alkyd resins for effective surface coating and composite materials

Preparation and Performance Research of Highly Oil-Absorption Ternary Copolymer Resin

Dependence of the air-drying exothermic effect on the double bond in alkyd resins

Preparation of hyper-branched fluorocarbon alkyd resin and the property of the coatings

A wide range of modified alkyd resins based on a new source of dicarboxylic acid as a binder for anticorrosive paint

Influence of CuO nanoparticle on palm oil based alkyd resin preparation and its antimicrobial activity

Synthesis of acrylic-modified water-reducible alkyd resin: improvement of corrosion resistance in painting formulations

Copolymerization of Polyvinyl Acetate and Hydroxylated Vitellaria paradoxa (Shea Butter) Oil