Discuss on Preparation Method of Composite Sports Equipment Based on Stretchable Nanofiber Fabric
Xiaomin Zhou,Wenjuan Wu
DOI: https://doi.org/10.1080/10584587.2024.2325871
2024-10-29
Integrated Ferroelectrics
Abstract:Stretchable nanofiber fabrics refer to fabrics woven with elastic nanofibers, and nanofibers are defined as fibers with a diameter less than 100 nm. For example, nanofibers are implanted on the surface of the fabric to form a stable gas film. The biphobic interface can be used for the purification and filtration of sports equipment, chemical products, medical drugs and other products. The development of sports is increasingly dependent on science and technology, and stretchable nanofibers, as an emerging field of science and technology, are undoubtedly widely used in sports materials. This article first explains the role and background of stretchable nanofiber fabrics in sports equipment, and explains related methods, such as the slurry method for preparing rubber thermally conductive composites in sports equipment, and testing the thermal conductivity and thermal conductivity of composite materials. Diffusion coefficient, density and specific heat capacity; and then explain the polyrhodanine coating method, coating stretchable nano fabric, testing its mechanical properties and thermal conductivity, calculating the agglomeration phenomenon of particles in the rubber, you can get the wrapped PRh- The effect of BNNSs' self-aggregation is suppressed; then the stress and strain of the nano-layer are tested using electrospinning technology, that is, the mechanical properties; finally, the tensile test of carbon fiber three-directional nano-fabric sports composite material is carried out, the tensile model is set, and the test is performed The strain and deformation in the stretching process at 0° and 90°, the load change and tensile elongation at break of the two are analyzed, the tensile attenuation rate in the 0° direction is lower than the attenuation rate in the 90° direction, 0° The tensile elongation at break in the direction of 90° is less than the tensile elongation at break in the direction of 90°, and one of the differences is judged that there is no carbon nanofiber on the parallel load in the 90° direction. The application of the above, taking bicycle tires and golf clubs as examples, combined with the average expected lift and 90° three-dimensional weaving method, the tensile strength direction can be obtained. This nanofiber three-dimensional weaving method has a higher tensile load than the composite material in the 90° direction. The average expected improvement of the ordinary weaving method is 36.1%, and the use of 90° three-dimensional nano fabric materials can improve the performance of sports equipment under this material by 16.9% to 51.8%.
engineering, electrical & electronic,physics, condensed matter, applied