Abstract:Damage simulation of anchoring structure model and damage simulation diagram in the coupled environment. To investigate the real anchorage performance of basalt and glass hybrid fiber reinforced plastic (FRP) anchors in external corrosive environments. In this paper, a combination of experimental studies and finite element analysis was used. By carrying out pull‐out tests of basalt and glass hybrid FRP anchors under the synergistic effect of freeze–thaw cycles and alkaline environment, the effects of factors such as hole diameter, anchorage length, and mortar strength on their anchorage performance and durability were investigated. Critical corrosion time was introduced to determine the degree of corrosion of the anchor rods. After that, it combined with numerical simulation to reveal the degradation mechanism of the anchorage performance of hybrid anchors. The results showed that the best anchorage performance of basalt/glass hybrid FRP anchors was achieved when the hole diameter was 24 mm, the anchorage length was 175 mm, and the mortar strength was 45.5 MPa. The ultimate pull‐out load was up to 122.16 kN. When the time did not exceed the critical corrosion time, the ultimate load‐carrying capacity of basalt and glass hybrid FRP anchors increased by 9.3% compared to the uncorroded environment. Beyond the critical corrosion time, the ultimate load‐carrying capacity was reduced by 23.3% and the anchorage performance was degraded. In addition, the contact interface between the anchor and the mortar is the weak area of the anchoring structure, which should be focused on in the later design of the actual project. Highlights Basalt/glass hybrid FRP anchors have good corrosion resistance. The anchoring performance of hybrid FRP anchors under the coupled environment is studied. Hole diameter and anchoring length have more influence on the anchor performance. The concept of critical corrosion time is put forward. The failure mechanism and coupling environment influence are revealed by FES.

Evaluation of the properties and applications of FRP bars and anchors: A review

Innovating arch structures with fiber-reinforced polymer composites: A review

Experimental and Numerical Study of Corrugated Anchors for CFRP Plates

Anchoring and stressing methods for prestressed FRP plates: State-of-the-art review

Anchorage Research for CFRP Tendons: A Review

Review of Experimental Studies on Application of FRP for Strengthening of Bridge Structures

Properties and applications of FRP in strengthening RC structures: A review

Smart FBG-based FRP Anchor

Experimental Studies and Application of Fiber-Reinforced Polymers (FRPs) in Civil Infrastructure Systems: A State-of-the-Art Review

Reliability-Based Evaluation of Flexural Members Strengthened with Externally Bonded Fiber-Reinforced Polymer Composites

Experimental study on the mechanical properties and failure modes of BFRP bar anchor systems under static tension loading

Smart Fiber-Reinforced Polymer Anchorage System with Optical Fiber Bragg Grating Sensors

Connections and Structural Applications of Fibre Reinforced Polymer Composites for Civil Infrastructure in Aggressive Environments

Application of a new basalt fiber-reinforced polymer anchorage structure in the tunnel—slope system under rainfall action

An effective improvement for enhancing the strength and feasibility of FRP spike anchors

Experimental Study on FRP-to-Concrete Bonded Joints with FRP Sheet Anchor System

FRP Application and Structural Engineering Innovation of High Performance Materials Based on Mechanical Analysis

Study on the anchoring performance and failure mechanism of basalt/glass hybrid fiber reinforced plastic anchors in coupled environment

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Advanced fiber reinforced polymer composites for sustainable civil infrastructures

Use of FRP composites in civil structural applications