Abstract:Concrete-to-concrete interfaces present both in new and existing construction, are commonly regarded as the weak link. Durability research of interfaces is a vital prerequisite for structural rehabilitation and strengthening applications under marine and coastal environments. Hence, to clarify the chloride ion transport behavior be-tween the new-old concrete composite system and its constituents, microstructural characteristics of the in-terfaces with various preparation methods were determined via field emission scanning electron microscopy. Then, the time-dependent diffusion chloride ion penetration together with its steady-state concentration distri-bution evaluated by using AgNO3 chromogenic, electron microprobe, and energy spectrum methods, as well as the numerical simulation based on the real interface roughness from the 3D laser scanning optical system. Results show that microcracks and a large amount of CaCO3 precipitations were formed in the concrete-to-concrete interface, where its porosity was higher compared to that of the matrix and interface transition zone around coarse aggregate; Therefore, the interface regions have higher tortuosity of water transport channel and strengthen the solution absorption rate, resulting in the internal chloride ions not only diffuse deeper perpen-dicular to the exposed surface but also ingress into the concrete on both sides as the concentration gradient simultaneously, leading to a "diffusion peak" formation. Furthermore, the effects of groove characteristics (such as orientations, clearance, width, and depth) on chloride transport were modeling evaluated in this study, in which the interfacial relationship could be optimized setting the reasonable groove and achieving the goal of durability equivalent to the cast-in-place structure.

Impact of Defects in Steel-Concrete Interface on the Corrosion-Induced Cracking Propagation of the Reinforced Concrete

State-of-art of corrosion-induced cracking of reinforced concrete structures

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Cracking of Reinforced Recycled Aggregate Concrete Beams Subjected to Loads and Steel Corrosion

Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Analysis on steel corrosion at the cracking of concrete

On the Penetration of Corrosion Products from Reinforcing Steel into Concrete Due to Chloride-Induced Corrosion

Corrosion Damages of Reinforced Concrete Characterized by X-ray CT and DVC Techniques

Study On Distribution Of Steel Corrosion Products In Concrete Structures

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

The Effect of Crack Width on Chloride-Induced Corrosion of Steel in Concrete

Damage Analysis and Cracking Model of Reinforced Concrete Structures with Rebar Corrosion

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Experimental and Numerical Study on the Microstructure and Chloride Ion Transport Behavior of Concrete-to-concrete Interface

Experimental Study on Distribution of Corrosion Products in Corrosion-Induced Cracks in Reinforced Structures

Modeling the Amount of Steel Corrosion at the Cracking of Concrete Cover