Abstract:For the numerical simulation of underwater wet flux-cored arc welding, the most crucial issue is to investigate the intense interactions between the underwater bubble, arc plasma, and molten metal. However, it is a great challenge to couple them into a single numerical model. In this study, a 3D three-phase flow model is originally established, which successfully couples the dynamic bubble, arc, and droplet. A modified Lee model is employed to realize spontaneous phase transition from liquid water to bubble gas. According to the simulation results, the bubble evolution is divided into four main stages, and two bubble separation modes are recognized. It is found that, both the changing pressure field around the bubble and the varying flow direction of surrounding water contribute to the unique bubble evolution patterns. As for the droplet, its violent up-and-down oscillation at the wire tip is mainly caused by the opposite gas drag forces, which are produced by the turbulent gas flow inside the bubbles. The upward gas drag force can even make the neck of the droplet disappear. With different droplet detaching angles, two predominant droplet transfer modes are numerically produced; when the angle reaches 147°, the droplet is pushed away and becomes a spatter. Furthermore, the underwater arc is found to be subjected to compressions from both the radial direction due to bubble necking and the axial direction due to droplet growth. The arc temperature and velocity vary significantly not only during the whole droplet transfer period, but also within each bubble evolution cycle. To verify the reliability of the model, underwater welding experiments and visual sensing are conducted. The simulated results match well with the experimental ones, with an 8% error in the droplet transfer period and only a 1.4% error in the bubble evolution cycle.

Two-Dimensional Particle Simulation of Flux- Wall Guid ed Transfer in Submerged Arc Welding

Numerical simulation of weld pool formation in submerged arc welding process

Visualization of arc plasma and molten wire behavior in CO2 arc welding process by three-dimensional numerical simulation

Numerical Simulation and Experimental Verification of Droplet Transfer During Local Dry Underwater MIG Welding Process of SUS304

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Numerical simulation of metal transfer in argon gas-shielded GMAW

Numerical simulation of arc, metal transfer and its impingement on weld pool in variable polarity gas metal arc welding

Modeling the coupled bubble-arc-droplet evolution in underwater flux-cored arc welding

Metal transfer in underwater flux-cored wire wet welding at shallow water depth

Three-dimensional numerical simulation of arc and metal transport in arc welding based additive manufacturing

Direct observation and numerical simulation of molten metal and molten slag behavior in electroslag welding process

Modeling and analysis of droplet forming in gas metal arc welding short circuiting transfer

Numerical Simulation of Molten Droplet Shape and Electromagnetic Pinch Effect in Short-Circuit Co2 Welding

Key mechanism of metal transfer and characteristic of cavity evolution during SAW using in-situ X-ray imaging method

Understanding of the Weld Pool Convection in Twin-Wire GMAW Process

Modeling Rapid Solidification and Melting Processes for Multiphase Flows in a Welding Technology Application

Analysis of Heat Transfer and Material Flow in Hybrid KPAW-GMAW Process Based on the Novel Three Dimensional CFD Simulation

An Improved Simulation Model for Three-Wire Gas Metal Arc Welding

Numerical Simulation Of Fluid Flow And Temperature Field In Keyhole Double-Sided Arc Welding Process On Stainless Steel

3D Numerical Investigation of a Free-Burning Argon Arc with Metal Electrodes Using a Novel Sheath Coupling Procedure