Abstract:The steels from which the components of mining machinery are constructed must be based primarily on knowledge of their behaviour under environmental conditions and of the excavation technology. Secondly, the structural changes undergone by the materials due to mechanical and thermal processing and the stresses generated by the action of excavation forces that can induce internal stresses at a level that is difficult to determine must be taken into account. Determining the level of structural and mechanical degradation involves sampling the load-bearing structure elements of the excavation and storage machinery for analysis of the mechanical and chemical properties of the component materials. The paper focuses on issues related to the structural and mechanical degradation of steel as a material for parts of mining machinery. In this paper, a methodology for evaluating the degree of structural degradation of three types of bucket wheel excavators with different operating hours (ERc 1400-30/7-07 with 50,400 h, ERc 1400-30/7-08 with 69,264 h, and SRs 1300-26/3.5 with 112,000 h) is proposed. The methodology aims to provide a quantitative assessment of the structural degradation by considering the specific elastic limit of the material used in the machines and the number of hours of operation. This method uses a minimum set of destructive mechanical tests, such as tensile, resilience for three working temperatures, chemical analysis, and durometry on resistance elements taken from the machine, as well as the use of Weibull analysis. By combining this information with the number of hours of operation, a comprehensive evaluation can be made to determine the extent of degradation and potential maintenance requirements. The use of a minimum set of mechanical tests ensures an efficient and cost-effective approach to assessing the structural integrity of these machines. The metallographic analysis highlighted a predominant and defined form of grain rearrangement in the E14-07 machine after only 50,400 h. The constituents identified in the samples taken from the three machines are ferrite and pearlite. The highest hardness of the samples was recorded for the E14-08 machine, with values between 162–165 HV10. For bucket wheel excavators E14-07 and E14-08, the material structure showed elongated grains in the direction of deformation, compared to the material structure of E13-04, which has finely equiaxed grains. As a result of the research, final conclusions were formulated.

Assessment Possibilities of the Quality of Mining Equipment and of the Parts Subjected to Intense Wear

Determining the Level of Structural and Mechanical Degradation of Steel in the Supporting Structure of Mining Excavation Machinery

Performance Evaluation of Underground Mining Machinery: A Case Study

Methodological bases for assessing the health of equipment being part of robotic coal mining complexes and predicting its changes during operation

Assessment of the technical state of mining machinery and devices with the use of diagnostic methods

611 Universal Drilling Machine Reliability Modeling and Performance Evaluation in Subterranean Coal Mines

A Review of Reliability and Fault Analysis Methods for Heavy Equipment and Their Components Used in Mining

Research Progress on Failure Analysis and Life Assessment of Key Components in Hydraulic Supports

Experimental and numerical evaluation for drum dynamic reliability under extremely complex working conditions

Failure analysis of scraper conveyor based on fault tree and optimal design of new scraper with polyurethane material

Design and development of a novel sliding friction and wear tester with complex working conditions

Reliability Analysis of Mining Machinery Pick Subject to Competing Failure Processes With Continuous Shock and Changing Rate Degradation

Reliability analysis of underground rock bolters using the renewal process, the non-homogeneous Poisson process and the Bayesian approach

Fuzzy expert analysis of the severity of mining machinery failure

Analyzing Reliability and Maintainability of Crawler Dozer BD155 Transmission Failure Using Markov Method and Total Productive Maintenance: A Novel Case Study for Improvement Productivity

Analysis of Scraper Conveyor Chain Dynamics under Falling Coal Impact Conditions

Mining equipment diagnostics in a mine shaft dewatering system – case study

Development of a Mathematical Model of Operation Reliability of Mine Hoisting Plants

Analysis of the Causes of Fatigue Cracks in the Carrying Structure of the Bucket Wheel in the SchRs4600 Excavator Using Experimental-Numerical Techniques

Optimal Inspection and Preventive Maintenance Scheduling of Mining Equipment

Fuzzy Risk-Based Maintenance Strategy with Safety Considerations for the Mining Industry