Abstract:The over usage of natural sand and cement has negative social and ecological effects. To address this, by-products of industrial wastes known as pozzolanic materials, including as fly ash, GGBFS, silica fume, and metakaolin, can be utilised with the manufactured sand in place of the natural fine aggregate and cement. As a result, the current research project discussed in this article examines the viability of replacing cement in concrete with pozzolana and crushed sand. Thus, this will address two issues at once: the large-scale use of pozzolanic materials and the preservation of natural sand quarries. The main objective of this experimental investigation is to find out the impact and durability properties of concrete produced by replacing natural sand by manufactured sand in varying percentages like 0, 10, 20, 30, 40, 50, 60 70, 80, 90, 100, and 20% cement replacing with pozzolanic materials. Cylindrical disc 150 mm diameter and 65 mm thick was tested for impact strength and chloride permeability 50 mm thick and 100 mm diameter samples were cast. The 28-day impact strength and chloride permeability of concrete mixed by partially substituting cement with pozzolan and partially substituting natural fine aggregate with artificial sand were tested. For the various concrete mix proportions, the findings for impact strength and chloride permeability were examined and contrasted with standard concrete. The results of this study show that substituting 20% of the cement with silica fume and 60% of the natural fine aggregate with M-sand results in concrete that has a maximum impact strength and a minimum chloride permeability. An ANN Model was developed using the experimental values. For design of model 400 result values where used, 20% results used for testing purpose and 80% results used for ANN model training. Calculated using the product of 25 input data. The ANN model's results offer a precise elastic prediction of the impact strength and chloride iron pass ability of concrete mixed with substituting industrial cementitious waste for cement and artificial sand with naturally occurring fine aggregate. The findings of this study help to reduce the extraction of non-renewable natural recourses and the environmental impact of industrial waste by preparing more sustainable concrete.

Sustainable replacement materials for concrete production from renewable resources and waste on interfacial bond properties

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

Impact of M-Sand on Rheological, Mechanical, and Microstructural Properties of Self-Compacting Concrete

An investigation on mechanical and microstructural properties of hybrid fiber reinforced concrete with manufactured sand and recycled coarse aggregate

Analysis of strength properties of concrete containing sea sand and micro silica as partial replacement of fine aggregate

Characterisation of domestically discarded vegetable waste biomass ash and silica sand mixed with ordinary Portland cement concrete

Enhancing sustainability in concrete: synergistic effects of sugarcane bagasse ash and iron ore tailings as eco-friendly cement and sand replacements

Influence of marine sand as fine aggregate on mechanical and durability properties of cement mortar and concrete

Mechanical and durability performance of sustainable concrete with the inclusion of alternative fine aggregate

Properties and microstructure of concrete using pozzolanic materials and manufactured sand as partial replacement of fine aggregate

Synergetic recycling of recycled concrete aggregate and waste mussel shell in concrete: Mechanical properties, durability and microstructure

Near-Surface and Chloride Permeability of Concrete Using Pozzolanic Materials and Manufactured Sand as Partial Replacement of Fine Aggregate

Durability Properties of Self Compacting Concrete by using M-Sand as Fine Aggregate

Synergistic Influence of Vindhyan Sandstone Manufactured Sand and Rice Husk Ash on Concrete Performance

Shear Fatigue Behavior of Reinforced Concrete Beams Produced with Manufactured Sand As Alternatives for Natural Sand

Studies on manufactured sand effect on mechanical properties of geopolymer concrete as replacement of river sand in fine aggregate

Strength and durability properties of concrete made with recycled coarse aggregate and seashore sand

Assessment of Mechanical Properties of Concrete with Substitution of River Sand by Robo Sand and Incorporation of Glass Powder

Experimental Research on the Effects of Waste Foundry Sand on the Strength and Micro-Structural Properties of Concrete

Influence on impact strength and chloride permeability of concrete made with cementitious material and artificial sand