Abstract:With the fast consumption of traditional fossil fuels and the urgent requirement for a low-carbon economy and sustainable development, supercapacitors are gaining more and more attention as a clean energy storage and conversion device. The research on electrode materials for supercapacitors has become a hot topic nowadays. An electrode material for a supercapacitor, comprising the ZIF-67 in-built carbon-based material, was prepared from a biomass pre-hydrolysate via a hydrothermal process. As a by-product of dissolving slurry, the pre-hydrolysate is rich in carbon, which is an excellent biomass resource. The utilization of pre-hydrolysate to prepare carbon energy materials could realize the high value utilization of pre-hydrolysate and the efficient energy conversion of biomass. Meanwhile, the cobalt-based MOF (such as ZIF-67), as a porous crystalline material, has the advantages of having a regular order, high specific surface area and controllable pore size, as well as good thermal and chemical stability. The addition of ZIF-67 modified the morphology and pore structure of the carbon, and the obtained samples showed outstanding electrochemical performance. One- and two-step synthetic processes generated specimens with a coral-like cross-linked structure and a new type of rough, hollow, dandelion-like structure, respectively, and the pore size was in the range of 2.0–5.0 nm, which is conducive to ion transport and charge transfer. In C2-ZIF-67, the hollow structures could effectively prevent the accumulation of the electrochemical active center, which could provide enough space for the shrinkage and expansion of particles to protect them from the interference of electrolytes and the formation of solid electrolyte interphase film layers. Additionally, the plush tentacle structure with low density and a large specific surface area could expose more active sites and a large electrolyte electrode contact area, and short electron and charge transport paths. Importantly, active, free electrons of small amounts of Co-MOF (1 wt%) could be stored and released through the redox reaction, further improving the electrical conductivity of Carbon-ZIF-67 materials in this work. Consequently, C2-ZIF-67 exhibited superior specific capacitance (400 F g−1, at 0.5 A g−1) and stability (90%, after 10,000 cycles).

In Situ Synthesis of ZIF-67 Thin Films Using Low Temperature Chemical Vapor Deposition to Fabricate All-Solid-State Flexible Interdigital in-Planar Microsupercapacitors

A Hollow-Shaped ZIF-8-N-Doped Porous Carbon Fiber for High-Performance Zn-Ion Hybrid Supercapacitors

Solvent-free MOF-CVD prepared ZIF-67 film with hollow and opened morphology for supercapacitor application

Microfluidic Printing of Vertically‐Oriented Nanosheets/MOFs Hetero‐Interface for Intensive Pseudocapacitive Storage

Laser Printer Patterned Sacrificed Layer for Arbitrary Design and Scalable Fabrication of the All-Solid-state Interdigitated In-Planar Hydrous Ruthenium Oxide Flexible Micro Supercapacitors

High-performance electrode of ZIF-67 metal-organic framework (MOF) loaded laser-induced graphene (LIG) composite for all-solid-state supercapacitor

Facile fabrication of all-solid-state flexible interdigitated MnO2 supercapacitor via in-situ catalytic solution route

In Situ Construction of ZIF-67-Derived Hybrid Tricobalt Tetraoxide@Carbon for Supercapacitor

A tremella-like in situ synthesis of ZIF-67Co(OH)F@Co3O4 on carbon cloth as an electrode material for supercapacitors

Scalable Fabrication of Flexible Solid‐State Asymmetric Supercapacitors with a Wide Operation Voltage Utilizing Printable Carbon Film Electrodes

High-Performance Micro-Supercapacitors with In-Situ Deposited Sb2s3@Pani Film Electrodes for Good Planar-Integration

Deposition of ZIF-67 and Polypyrrole on Current Collector Knitted from Carbon Nanotube-Wrapped Polymer Yarns As a High-Performance Electrode for Flexible Supercapacitors.

NiMnCo-LDH in-situ derived from ZIF-67@ZnO as self-supporting electrode for asymmetric supercapacitor device

Microfluidics‐Assisted Fabrication of All‐Flexible Substrate‐Free Micro‐Supercapacitors with Customizable Configuration and High Performance

In-Built Fabrication of MOF Assimilated Porous Hollow Carbon from Pre-Hydrolysate for Supercapacitor

Constructing Vertically Aligned ZIF-67 Microrod Arrays on Carbon Cloth with Commercial-level Mass-loading for High-performance Supercapacitors

Flexible, Planar Integratable and All-Solid-state Micro-Supercapacitors Based on Nanoporous Gold/ Manganese Oxide Hybrid Electrodes Via Template Plasma Etching Method

In-Situ Annealed Ti3C2Tx MXene Based All-Solid-State Flexible Zn-Ion Hybrid Micro Supercapacitor Array with Enhanced Stability

Nickel-molybdenum metal hydroxide wrapped ZIF-67 for supercapacitor applications

Rational design of a high performance all solid state flexible micro-supercapacitor on paper

Co-TCPP/MXene Film Electrodes and Patterned Interdigital Electrodes with High Performance for Flexible All-Solid Supercapacitors