Abstract:Two different polymer resins were used to create three different octet-truss lattice structures of different densities. The mechanical behaviour of these structures has been examined under both quasi-static and dynamic compressive loading. The structures were printed using stereolithography (SLA) additive manufacturing. The basic building octet unit has a fixed strut length of L=10mm, with the designed strut radius varying from R=0.7mm to 1.3mm to provide structures of different densities. It has been found that the mechanical behaviour of the printed octet structures depends on both the relative density and the intrinsic material properties. Higher density structures show larger effective yield and compressive strengths, while the basic printing material fundamentally determines its macroscopic properties: one material provides a brittle mechanical response under compression while the other provides a tough response. The former lattice structures behaved in a brittle manner at all relative densities, fracturing at small strains. For the latter resin lattice structures, on the other hand, under quasi-static compression, the stress-strain curves changed from a slightly stress oscillating mode at low relative density (i.e. ρ¯=0.13) to a stable stress plateau mode at high relative density (i.e. ρ¯=0.41). The Specific Energy Absorption (SEA) of both lattice structures had a monotonically increasing relationship with relative density, the SEA of the brittle resin specimen is higher than that of the tough resin specimen, while the tough resin specimen exhibits its excellent energy absorption under a wide displacement range. For the dynamic compressive tests, the tougher resin structures displayed strain-rate effects, while the more brittle ones did not. The numerically predicted response of both lattice structures agreed closely with the experimental results.

Modeling and characterizing the dynamic response of Octet-Truss lattice structures using elastic parameters determined from Resonant Ultrasound Spectroscopy

A non-destructive resonant acoustic testing and defect classification of additively manufactured lattice structures

Image-based numerical characterization and experimental validation of tensile behavior of octet-truss lattice structures

Direct measurement of the effective properties of an additively manufactured titanium octet truss unit cell using high energy X-ray diffraction

On the elastodynamic properties of octet truss-based architected metamaterials

The Development of a General Anisotropic Material Model with Resonant Ultrasound Spectroscopy Technology for the Measurement of Elastic Constants of Piezoelectric Crystals

Resonant ultrasound spectroscopy applications: Elastic moduli computation with x-ray computed tomography input for irregularly shaped objects

Mechanical Behaviors of SLM Additive Manufactured Octet-Truss and Truncated-Octahedron Lattice Structures with Uniform and Taper Beams

Resonance Frequency Prediction Approach of Lattice Structure Fabricated by Selective Laser Melting

Bending behavior of additively manufactured lattice structures: numerical characterization and experimental validation

Additively-manufactured 3D Truss-Lattice Materials for Enhanced Mechanical Performance and Tunable Anisotropy: Simulations & Experiments

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

Investigation on the Fracture Behavior of Octet-Truss Lattice Based on the Experiments and Numerical Simulations

Mechanical characterization and constitutive modeling of additively-manufactured polymeric materials and lattice structures

Design of Self-Supporting Lattices for Additive Manufacturing

Mechanical Behaviour of Additively-Manufactured Polymeric Octet-Truss Lattice Structures under Quasi-Static and Dynamic Compressive Loading

Nonlinear mechanical properties of lattice truss materials

Multiscale modeling and design of lattice truss core sandwich metastructures for broadband low-frequency vibration reduction

Numerical investigation of the effective mechanical properties of Octet Truss lattice structures with different strut geometry

Resonant ultrasound spectroscopy: Sensitivity analysis for anisotropic materials with hexagonal symmetry

Mechanical Characterization of Lattice Structures Fabricated by Selective Laser Melting Via an Image-Based Finite Cell Method with a Damage Model