Abstract:Tire rubber waste is globally accumulated every year. Therefore, a solution to this problem should be found since, if landfilled, it is not biodegradable and causes environmental issues. One of the most effective ways is recycling those wastes or using them as a replacement for normal aggregate in the concrete mixture, which has high impact resistance and toughness; thus, it will be a good choice. In this study, 135 data were collected from previous literature to develop a model for the prediction of rubberized concrete compressive strength; the database comprised different mixture proportions, the maximum size of the rubber (1-40 mm), and the rubber percentage (0-100%) replacing natural fine and coarse aggregates were among the input parameters in addition to cement content (380-500 kg/m3) water content (129-228 kg/m3), fine aggregate content (0-925 kg/m3), coarse aggregate content (0-1303 kg/m3), and curing time of the samples (1-96 Days); then the collected data were used in developing Multi Expression Programming (MEP), Artificial Neural Network (ANN), Multi Adaptive Regression Spline (MARS), and Nonlinear Regression (NLR) Models for predicting compressive strength (CS) of rubberized concrete. The parametric analysis reveals that as the maximum rubber size increases, the reduction in compressive strength becomes more pronounced. Notably, this strength decline is more significant when rubber replaces coarse aggregate than its replacement of fine aggregate. Among the input parameters considered, it is evident that the fine aggregate content exerts the most substantial influence on the compressive strength of rubberized concrete. Its impact on predicting compressive strength surpasses other factors, with the concrete samples' curing time ranking second in importance. According to the assessment tools, the ANN model performed better than other developed models, with high R2 and lower RMSE, MAE, SI, and MAPE. Additionally, ANN and MARS models predicted the CS of different sizes better than MEP and NLR models. Subsequently, we employed the collected data to develop predictive models using Multi Expression Programming (MEP), Artificial Neural Network (ANN), Multi Adaptive Regression Spline (MARS), and Nonlinear Regression (NLR) techniques to forecast the compressive strength (CS) of rubberized concrete. The statistical analysis tools assessed the performance of these developed models through various evaluation criteria, including the Coefficient of Determination (R2), Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Scatter Index (SI), and Mean Absolute Percentage Error (MAPE). In summary, our study underscores the efficacy of recycling rubber materials in concrete production. It presents a powerful predictive model for assessing the compressive strength of rubberized concrete, with the ANN model standing out as the most accurate and reliable choice for this purpose.

Models for Predicting Strength Reduction Factors for Concrete that Utilizes Palm Kernel Shells and Waste Automobile Tires as Aggregates

Probabilistic Models of Concrete Compressive Strength and Elastic Modulus with Rubber Aggregates

High-strain Rate Compressive Behavior of Concrete with Two Different Substituted Recycled Plastic Aggregates: Experimental Characterization and Probabilistic Modeling

Hybrid nonlinear regression model versus MARS, MEP, and ANN to evaluate the effect of the size and content of waste tire rubber on the compressive strength of concrete

Experimental Investigation and Machine Learning Prediction of Mechanical Properties of Rubberized Concrete for Sustainable Construction

Optimization of recycled rubber self-compacting concrete: Experimental findings and machine learning-based evaluation

Machine learning models for predicting compressive strength of fiber-reinforced concrete containing waste rubber and recycled aggregate

Experimental Research on Abrasion Resistance and Predictive Model of High-Density Rubberized Concrete with High Strength

Mechanical and microstructural characterization of sustainable concrete containing recycled concrete and waste rubber tire fiber

Strength, durability and shrinkage behaviours of steel fiber reinforced rubberized concrete

Experimental investigation into the properties of crumb rubberized concrete incorporating corrugated round steel fibers

Optimal proportional combinations of rubber crumbs and steel slag for enhanced concrete split tensile strength

Machine Learning Modeling Integrating Experimental Analysis for Predicting Compressive Strength of Concrete Containing Different Industrial Byproducts

Enhancing high-performance concrete sustainability: integration of waste tire rubber for innovation

The effectiveness of surrogate models in predicting the long-term behavior of varying compressive strength ranges of recycled concrete aggregate for a variety of shapes and sizes of specimens

Rubber/crete: Mechanical properties of scrap to reuse tire-derived rubber in concrete; A review

RETRACTED: Experimental investigation and comparative machine-learning prediction of strength behavior of optimized recycled rubber concrete

Evaluation and Optimization of the Replacement of Fine Aggregate by Waste Tire Rubber in Geopolymer Mortar with Metakaolin

Performance analysis and engineering application of waste rubber crumbs in concrete

Mesoscopic Analysis of Rounded and Hybrid Aggregates in Recycled Rubber Concrete

Effect of recycled rubber aggregate size on fracture and other mechanical properties of structural concrete