Effect of Fabric Factors on the Mechanical Behavior of Foliated Rocks: A Particle Flow Approach

Xiaomeng Yin,Yajun Huang,Aiming Zhang,Yuju Lei

DOI: https://doi.org/10.1007/s10706-022-02321-4

2022-10-20

Geotechnical and Geological Engineering

Abstract:The anisotropic properties of foliated rocks depend greatly on their fabric. However, the fabric properties of these rocks have strong spatial variability due to the influence of protolith compositions and metamorphic environments. In this study, one type of quartz-mica schist was taken as a representative of foliated rocks and was used for specimen preparation and testing. First, uniaxial compression tests and micro tests were utilized to understand the mechanical behavior of the studied schist and to analyze the fabric. With the aid of digital image processing technology, some fabric information regarding representative flaky minerals was obtained and condensed into key fabric factors, including the flaky mineral content (FMC), ratio of long and short axes, degree of directional arrangement (DAD) and degree of mineral aggregation (MAD). Then, a series of two-dimensional particle flow models that incorporated the fabric factors were constructed, and numerical uniaxial compression tests using particle flow code were utilized to study the effects of fabric factors on the complex mechanical behavior of foliated rocks. The numerical tests reveal that an increase in FMC enhances the ductility of rock and that slender flaky minerals act as barriers to hinder crack propagation to a certain extent when schist bears compressional loads in a direction perpendicular to schistosity planes. Moreover, the DAD exerts a significant influence on the failure mode of schist, and the three well-known types of strength curves (e.g., U-shaped curve, shoulder-shaped curve and wave-shaped curve) are closely related to the DAD. The strength anisotropy of schists with high MADs is much stronger than those with low MADs.