Abstract:The object of the research is the process of directed structure formation in the body of alkaline concrete, made using a reactive aggregate, in this case, basalt, and the process of deformation development in such concrete. The problem with using reactive aggregates is that they cause alkaline corrosion. It manifests itself in the form of cracks and layers of gel-like substances that form at the point of contact of the aggregate with the cement stone. During the research, methods of physical and chemical analysis were used (X-ray phase, differential thermal and thermogravimetric analyzes, electron microscopy, infrared spectroscopy, microprobe analysis). And also methods of mathematical planning of experiments have been used for the dependence of the physical and technical properties of cements and the directions of their structure formation. Also, the research has been carried out based on the analysis of world achievements in solving the problem of alkaline corrosion of concrete. The possibility of joint operation of the matrix of alkaline cements and active aggregates, represented by basalt, has been determined. The component composition of alkaline cement has been optimized and the need to increase the amount of the alkaline component in the system for the normal course of structure formation processes has been proved. The study of the influence of technical factors and conditions of hardening on the development of processes of structure formation of the investigated compositions has been carried out. The deformation properties of fine-grained concrete based on slag-alkaline cement and basalt aggregate have been investigated. It is shown that the expansion deformations of the samples, which accompany the process of alkaline corrosion of the aggregate in concrete, are directly related to the component composition and hardening conditions of the material. The obtained research results confirm the possibility of using active aggregates for the manufacture of building materials, in particular, based on alkaline cements. But for the safe course of the processes of structure formation, the component composition of the system has to be adjusted by introducing an active mineral additive and an additional alkaline component. The use of hydrophobizing additives makes it possible to increase the strength of the material even when operating under normal heat and humidity conditions.

STUDY OF ACID RESISTANCE OF HYBRID ALKALI ACTIVATED NORMAL HARDENING CEMENTS

Mix Design of Acid Resistant Alkali Activated Materials for Reconstruction of the Building Constructions Damaged by the War

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

EFFECT OF ADDITIONAL INPUT OF Na3PO4∙12H2O ON ACID RESISTANCE INDICATORS OF HYBRID ALKALINE CEMENTS

Development of alkaline concrete on the basis of active aggregates

Design of the composition of alkali activated portland cement using mineral additives of technogenic origin

Degradation Kinetics of Cement-Based Materials in Citric Acid

Resistance of blended alkali-activated fly ash-OPC mortar to mild-concentration sulfuric and acetic acid attack

Inorganic Acid Resistance Performances of Magnesium Phosphate Cement: A Two-Year Observation

Investigation of the properties of alkaline binding materials with the addition of fine bentonite

MODIFIED COMPOSITE CEMENTS IN THE SYSTEM СаО–Al2O3–SO3–H2O

Effects of citric acid on the rheology, hydration and strength development of alkali aluminosilicate cement

Mechanical and Durability Evaluation of Metakaolin as Cement Replacement Material in Concrete

Alkali-activated materials for catalytic applications: A state-of-the-art review

Chemical resistance in acidic environments of alkali-activated lightweight composites based on secondary raw materials

Improved chloride binding capacity and corrosion protection of cement-based materials by incorporating alumina nano particles

Enhancing alkaline resistance of concrete using alccofine and metakaolin in mineral admixtures of sustainable development

Strength formation mechanism and curing system optimization of low-carbon cementitious materials prepared by synergistic activation of multiple alkaline solid wastes

Recent Development of Magnesium-Based Cements - Magnesium Phosphate Cement and Magnesium Oxychloride Cement

Synthesis of high alumina cement based on metallurgy wastes

Strength and Acid Resistance of Ceramic-Based Self-Compacting Alkali-Activated Concrete: Optimizing and Predicting Assessment