Abstract:Sustainability in construction, using concrete as construction material, is initiated to obtain through cement, i.e. binder, optimisation and by application of secondary cementitious materials(SCMs) as component substitute of cement. The cement production industry has previously attained notable improvements in sustainability by use of byproducts of various industries as SCMs through blending suitable materials, like ferro silicon industrial by product mirco silica, steel industry by product finely ground granulated blast furnace slag, thermal power industry byproduct fly ash etc., to diminish the CO 2 emission from the manufacturing plants of cement. Pozzolanicity and pore- filling qualities are the two pre requisite characteristics of the SCMs so they can play effective role in reducing the cement quantity in concrete and there by achieve sustainability. But as these quality features are inadequate in most of the industrial waste byproducts as they are not purposefully/specifically/ precisely manufactured but they are only the byproducts of industries produced as a process of manufacturing some products like steel, ferro silica alloys etc., or using some other materials like coal for producing energy. Also these SCMs are globally not obtainable everywhere. Construction industry is thus struggling with considerable cement consumption in its various activities and there by releasing enormous amounts of CO 2 emissions, consumption of natural resources thereby depleting the same and increase in cost of cement production due to imposed green tax and shortage of suitable raw materials. Therefore, there is an emergent preference towards finding out various substitutive inorganic binders from native sources for partly substituting cement in concrete construction. One of the solutions to achieve sustainability in concrete construction is to use moderate reactive SCMs like flyash(FA), GGBFS(ground granulated blast furnace slag) in higher quantity and reactive SCMs like SF etc., so that demerits of slow setting and late strength gain in concrete prepared with moderate SCMs like GGBFS,fly ash etc., can be compensated by reactive SCMs,in lower quantities. Recently clays are observed to be an ample possibility as a promising reactive SCMs as they are richer in alumina and silica, and have good pozzolanic properties in definite raw, calcination situations or surface alterations forms for producing sustainable concretes with lower expenses and more eco-friendliness. In this study experimental investigation presented on the utilisation of metakaolin (MK), a high reactive SCM, in combination with GGBFS, a moderately reactive SCM, in the development of fast setting early strength sustainable self consolidating concrete(SCC) intended to use in fast track repairs/construction. Influence of MK on properties in fresh state and solidified state of SCC were studied and its effect on durability characteristics of SCC established.

Enhancing alkaline resistance of concrete using alccofine and metakaolin in mineral admixtures of sustainable development

Impacts of corrosion inhibiting admixture and supplementary cementitious material on early strength concrete

Investigation study data to develop sustainable concrete mix using waste materials as constituents

Resistance to acid, alkali, chloride, and carbonation in ternary blended high-volume mineral admixed concrete

A Study on the Strength Aspects of Concrete with Metakaolin, GGBFS and Rice Husk Ash as Partial Replacement of OPC

Sustainable Fast Setting Early Strength Self Compacting Concrete(FSESSCC) Using Metakaolin

Investigating the influence of various metakaolin combinations with different proportions of pond ash and Alccofine 1203 on ternary blended geopolymer concrete at ambient curing

A study on the synthesis and performance evaluation of fly ash and alccofine as sustainable cementitious materials

Effect of Dolomite and Metakaolin on the Properties of High-Performance Concrete

Investigating embodied carbon, mechanical properties, and durability of high-performance concrete using ternary and quaternary blends of metakaolin, nano-silica, and fly ash

Development of high early strength in concrete incorporating alccofine and non-chloride accelerator

Design and Preparation of Metakaolin-Based Mineral Admixture and its Effects on the Durability of Concrete

Effects of active mineral admixture on mechanical properties and durability of concrete

Mechanical and Durability Evaluation of Metakaolin as Cement Replacement Material in Concrete

Use of metakaolin as supplementary cementitious material in concrete, with focus on durability properties

Alkalinity Regulation and Optimization of Cementitious Materials Used in Ecological Porous Concrete

Influence of industrial waste and mineral admixtures on durability and sustainability of high-performance concrete

Resistance of blended alkali-activated fly ash-OPC mortar to mild-concentration sulfuric and acetic acid attack

Effects of key factors on the compressive strength of metakaolin and limestone powder-based alkali-activated concrete mixtures: An experimental and statistical study

Assessment of Various Mitigation Strategies of Alkali-Silica Reactions in Concrete Using Accelerated Mortar Test

Effect on Sulfuric Acid Resistance and Shrinkage of Concrete Incorporating Processed Bagasse Ash and Silica Fume