Abstract:With the large-scale construction of suburban railway viaducts, the noise problem along the viaducts is becoming more and more prominent. Conventional vertical noise barriers have been widely used to alleviate the noise problem along the suburban railway viaducts. However, conventional vertical noise barriers often have an adverse effect on the urban landscape and also block the view of train drivers and passengers. A type of near-rail low-height noise barrier was planned to install on the viaducts of Wenzhou Rail Transit Line S1 to reduce the impact of noise on residents along the railway lines. To assess the acoustic performance of the near-rail low-height noise barrier, a numerical procedure for railway viaduct comprehensive noise considering wheel-rail noise and structure-borne noise of the bridge and noise barriers was proposed and then verified by a field test. On this basis, numerical models were established to compare the acoustic performances of the near-rail low-height noise barrier and conventional vertical noise barrier. The influences of the height and top shape of the near-rail low-height noise barrier on the acoustic performance were discussed. Based on the numerical analysis results, it is found that both the near-rail low-height noise barrier and conventional vertical noise barrier have good acoustic performances. The noise reduction effect of the near-rail low-height noise barrier is slightly better than that of the conventional vertical noise barrier. The acoustic performance of the near-rail low-height noise barrier gradually improves, but the improvement rate gradually slows down as the height of the noise barrier increases. The noise reduction effects of both the inverted L-shaped and Y-shaped near-rail low-height noise barrier are obviously better than that of the vertical one, while the noise reduction effects of the inverted L-shaped near-rail low-height noise barrier are slightly better than the Y-shaped one.

Lightweight Retractable Noise Barrier in Hong Kong

Ultrasparse and Omnidirectional Acoustic Ventilated Meta-Barrier

Absorptive noise barrier development

Designing Roadside Noise Barrier

Applications of noise barriers with a slanted flat-tip jagged cantilever for noise attenuation on a construction site

Control of Noise at the Entrance or Exit of Parking Garages

Modeling, analysis, and validation of an active T-shaped noise barrier

Acoustic–vibration characteristics and low–structural–noise optimization design of upright sound barrier for rail transit

Optimization and Experiment on the Top Form of Urban Elevated Road Noise Barrier

Suitability of Active Noise Barriers for Construction Sites

Acoustic performance of near-rail low-height noise barriers installed on suburban railway bridges

An innovative design and development of noise barrier with newly composite mix of acoustic panel

A Real-Time Platform for Portable and Scalable Active Noise Mitigation for Construction Machinery

Low Cost Noise Barriers for Mitigation of Rail Noise

A step-by-step experimental characterization of a low-height acoustic barrier for railway applications

Development on acoustic louvre to enhance the noise reduction performance of acoustic balconies

REDUCTION OF LOW-FREQUENCY SOUND FROM IMPULSIVE NOISE SOURCES AT CONSTRUCTION SITES BY BARRIER WALLS ---INTERNOISE 84. INTERNATIONAL COOPERATION FOR NOISE CONTROL. PROCEEDINGS 1984 INTERNATIONAL CONFERENCE ON NOISE CONTROL ENGINEERING, HONOLULU, HAWAII, 3-5 DECEMBER 1984, VOLUMES 1 AND 2.

Roof Structure Design In Active Noise Barrier

Analysis on Noise Reduction Effect and Investment Benefits of Different Rail Transit Sound Barriers

Prediction of Noise Reduction Effect of Sound Barriers and Evaluation of Noise Annoyance

A preliminary study on the performance of indoor active noise barriers based on 2D simulations