Abstract:Natural ventilation and the type of window used are closely related. Many works have already been done on identifying the window types that can enhance ventilation performance in residential buildings. However, window performance has been investigated either independently, without considering the interactive effects of other apertures (relative positions of windows and window orientations) or it has been examined based on very limited wind data sets. To fill this research gap, this study aims to evaluate the influence of window types on indoor ventilation performance of residential units in Hong Kong, taking into account the interactive effect and based on representative wind data sets. Air change per hour (ACH) was used to quantify natural ventilation. In this study, site measurement was conducted at a carefully selected residential unit to provide data for validation of the Computational Fluid Dynamics (CFD) settings. The validated settings were used for further CFD simulations. The Central Composite Design method and the Squeeze Theorem were used to determine the representative wind data sets. The Response Surface Regression method was used to develop a mathematical model for quantifying the interactive influence of different apertures on indoor ventilation and to enable quick estimation of ACH. The results lead to the conclusion that for all apertures, side hung (SH) window is the most effective design, followed in descending order by top hung (TH) window and sliding (SLD) window. The maximum achievable ACH for SH and TH windows were 124% and 97% higher than the SLD window. It was also found that if windows can be located only on the same side of a residential unit, SH windows and south facing TH windows should be preferred.

Development on acoustic louvre to enhance the noise reduction performance of acoustic balconies

Experimental study of active noise control for a full-scale plenum window in a domestic apartment

An Acoustic Window for Sustainable Buildings

Design of acoustic windows with micro-perforated absorbers

Speech interference and transmission on residential balconies with road traffic noise

Impact Sound Insulation of thermally insulated Balconies

Numerical simulation of an acoustic window system using finite element method

Development of Metacage for Noise Control and Natural Ventilation in a Window System

An Acoustic Window System with Optimum Ventilation and Daylighting Performance

Active Noise Attenuation in Ventilation Windows.

Feasibility of Applying Micro-Perforated Absorbers in Acoustic Window Systems

Effects of wing wall at the balcony on the natural ventilation performance in medium-rise residential buildings

Progress in research on natural ventilation ANC windows

Numerical simulation of the sound field inside a natural ventilation window

Effect of balconies on thermal comfort in wind-induced, naturally ventilated low-rise buildings

Comprehensive Renovation and Optimization Design of Balconies in Old Residential Buildings in Beijing: A Study

Combining Noise Mapping and Ventilation Performance for Non-Domestic Buildings in an Urban Area

A Metawindow with Optimised Acoustic and Ventilation Performance

Mitigation of wind-induced noise of balcony railings in a condominium building

Using response surface regression method to evaluate the influence of window types on ventilation performance of Hong Kong residential buildings

Theoretical and numerical analysis on low-frequency sound transmission from façades into room