Abstract:In carrying out maintenance and repair activities in an industry, of course a level of efficiency and accuracy is needed so that production results are in accordance with the targets set by the company. To fulfil the needs of electricity consumption in a company, a distribution panel is needed as a channel for voltage from the substation to the distribution panel and then distributed back to the production machines. From findings in the field that often occur, the temperature in the panel room has increased and exceeds the temperature thresholds that should be 32̊C, and must not exeed 40̊C (Isnainny, Azharro 2021). Referring to the background above, the author took the initiative to make a control device and monitor temperature and voltage as well as current in a distribution panel. In the modern era and the development of technology, especially in companies and in an education, it is very reasonable to use IoT (Internet of things) based technology so that it can make it easier for users to be able to operate it remote, therefore the author wants to make this control and monitoring system operable long distance. This aims to increase the efficiency of maintenance and repair of work equipment that supports the increase in production results that have been determined by the company. In making the tool the author uses several sensors to read the temperature values contained at that location. The sensors used are the DHT22 sensor as a room temperature value reader, the ZTMP101B sensor as a voltage value reader to be monitored, the SCT-013 sensor is used as an electric current value reader. The author also uses the Blynk application as a place to monitor all value readings generated by the sensor. The author uses the ESP32 microcontroller as the brain in a series of devices. In addition to the integrated wifi module, that becomes a wireless microcontroller is also equipped with quite a lot of GPIO pins, making it easier for the author to utilize the sensors that will be connected to the microcontroller.

Room Monitoring Uses ESP-12E Based DHT22 and BH1750 Sensors

Dasboard Monitoring Temperatur Ruangan Server dengan Sensor DHT22 Berbasis ESP8266 pada Universitas Raharja

ENVIRONMENTAL SENSING SEBAGAI INFORMASI SUHU RUANGAN KELAS A2-09 UNISBA BLITAR BERBASIS IOT (INTERNET OF THINGS) MENGGUNAKAN ESP32

Sistem Monitoring Suhu Lab Komputer Universitas Bina Darma Berbasis IOT Mobile Android Menggunakan Arduino

Konfigurasi Arduino IDE Untuk Monitoring Pendeteksi Suhu dan Kelembapan Pada Ruang Data Center Menggunakan Sensor DHT11

The Development of an IoT-based Indoor Air Monitoring System Towards Smart Energy Efficient Classroom

Design of Monitoring System Temperature And Humidity Using DHT22 Sensor and NRF24L01 Based on Arduino

Monitoring Ruangan Berbasis Internet of Things Menggunakan Thingsboard dan Blynk

Perancangan Sistem Pengukuran Suhu Dan Kelembaban Otomatis Dengan Md_Parola Dan Sensor Dht22

Internet of Things (Iot) Based Temperature and Humidity Monitoring System in the Chemical Laboratory of the Samarinda Industry Standardization and Research Center

SYSTEM CONTROL DAN MONITORING SUHU PADA SUB DISTRIBUTION PANEL (SDP) BERBASIS IoT MENGGUNAKAN SENSOR DHT22 UNTUK MENGURANGI TERJADINYA OVERHEAT PADA PT.XYZ

Design of air temperature and humidity measurement based on Arduino ATmega 328P with DHT22 sensor

A portable node of humidity and temperature sensor for indoor environment monitoring

Design of server room temperature and humidity control system using fuzzy logic based on microcontroller

Temperature and Humidity Monitoring System on Android Based Wallet House

Perancangan Dan Implementasi Alat Ukur Suhu dan Kelembaban Udara dengan Perekam Data Berbasis Arduino Uno dan Sensor DHT22 di Badan Meteorologi Klimatologi dan Geofisika Citeko

Development of Practicum Tools for Measuring Temperature and Air Humidity Based on Microcontroller by Telemetric

RANCANG SISTEM MONITORING KUALITAS DAN KETINGGIAN AIR BERBASIS INTERNET OF THINGS (IOT)

Prototipe Dehumidifier untuk Monitoring Kelembaban Laboratorium Biomedis Menggunakan Sensor DHT22 dan Peltier TEC1-12706 Berbasis Arduino

Data acquisition system in measuring carbon dioxide, humidity and temperature: design and fabrication

Design and build an internet of thing (IOT) solar panel monitoring and solar tracking system