Abstract:In order to explore the thermal load change of the diesel engine piston under transitional conditions, and the influence of the position of cooling gallery on the heat transfer characteristics of the piston. An off-road high-pressure common-rail diesel engine is chosen as the research object. The sequence coupling method is used to establish the fluid–solid coupling heat transfer simulation model of the piston-gallery under the transition conditions of cold start, urgent acceleration and rapid deceleration. The Pareto optimization algorithm is introduced to optimize the position of the cooling gallery to reduce the maximum temperature and maximum thermal stress of the piston. The results show that the maximum temperature of the piston can be reduced by reducing the distance between the cooling gallery and the throat area under the maximum torque condition, and that the maximum thermal stress of the piston can be reduced by reducing the distance between the cooling gallery and the throat area or by increasing the distance between the cooling gallery and the ring area. Compared with the original design, the maximum temperature of Design A decreases by 1.28 °C while the maximum thermal stress decreases by 2.07 MPa. The maximum temperature and maximum thermal stress of Design B decreases by 0.22 °C and 0.5 MPa, respectively. The maximum thermal stress of Design C decreases by 2.67 MPa when the maximum temperature increases by 1.15 °C. The maximum change in temperature of the three typical designs and the original design of the piston throat under cold start, urgent acceleration and rapid deceleration conditions reached 207.29 °C, 136.78 °C and 9.89 °C, and the maximum change of thermal stress reached 8.62 MPa, 20.43 MPa, 4.08 MPa, respectively. The maximum change in temperature of the piston first ring groove under cold start, urgent acceleration and rapid deceleration conditions reached 172.00 °C, 83.52 °C and 7.36 °C, and the maximum change in thermal stress reached 22.96 MPa, 43.10 MPa, 5.72 MPa, respectively. The conclusions obtained can provide boundary conditions for further study of the thermal load change law of the same type of pistons, and also provide a theoretical basis for diesel engine piston structure optimization and the performance improvement.

Study on thermal-mechanical coupling of the ceramic layer in diesel engine piston with thermal barrier coating

Experimental and simulation study on aluminium alloy piston based on thermal barrier coating

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Research and analysis of a thermal optimisation design method for aluminium alloy pistons in diesel engines

Calculation and Analysis of Piston Thermal Shock by Using Plate Model

Effect Of Ceramic Coated Pistons On The Performance Of A Compressed Natural Gas Engine

Effect of Fire-Deck Thickness on Thermal Status of Cylinder Head

The impact of piston thermal barrier coating roughness on high-load diesel operation

Finite element analysis of thermal barrier properties under relevance vector machine in coated pistons and blades

Thermal Stress Analysis of Ceramic-Coated Diesel Engine Pistons Based on the Wavelet Finite-Element Method

Thermo-mechanical analysis of a glass-ceramic piston for potential use in combustion engines

Effects of the Piston Skirt's Surface Structure on Coating Quality and Friction Functions

Experimental and simulation study on heat transfer characteristics of aluminium alloy piston under transition conditions

Numerical investigation of the effect of thermal barrier coating on combustion and emissions in a diesel engine

Thermal Load Analysis of Piston Damaged by Wall-Wetting Combustion in a Heavy-Duty Diesel Engine

FEA Analysis and Experimental Investigation of the Ceramic Coating on Aluminum Piston Material By Plasma Spray Coating Technique

Studies of A Heat-Pipe Cooled Piston Crown

Low thermal inertia thermal barrier coatings for spark ignition engines: An experimental study

High temperature tribological performance and thermal conductivity of thick Ti/Ti-DLC multilayer coatings with the application potential for Al alloy pistons

Experimental investigation of the relationship between thermal barrier coating structured porosity and homogeneous charge compression ignition engine combustion

A review on preparation process and tribological performance of coatings for internal combustion engine piston ring