Abstract:This study aimed to evaluate dental adhesives containing different concentrations of zinc oxide nanoparticles (ZnO‐NPs) for their use in the treatment of dental fluorosis, observe the interaction of the adhesive on healthy enamel surfaces and with mild and moderate fluorosis, measure the adhesive strength and fluorosis, and determine the phosphorus (P) and calcium (Ca) content on these surfaces, as a reference for the potential use of this adhesive with ZnO‐NPs for dental fluorosis treatment. Transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM) were used to characterise the ZnO‐NPs and analyse the weight percentages of P and Ca in the enamel using X‐ray energy dispersive spectroscopy (EDS) and the adhesive strength using a universal mechanical testing machine. FESEM characterisation revealed that the ZnO‐NPs were less than 100 nm in size, with quasi‐spherical and hexagonal prism shapes. The synthesis of the ZnO‐NPs was confirmed by TEM, revealing their hexagonal crystalline structure. The adhesive strength by the universal mechanical testing machine showed that the adhesive with a 3% wt. concentration of ZnO‐NPs was better in the three groups of teeth, showing higher adhesive strength in teeth with mild (15.15 MPa) and moderate (12.76 MPa) fluorosis surfaces, and was even higher than that in healthy teeth (9.65 MPa). EDS analysis showed that teeth with mild and moderate fluorosis had the highest weight percentages of P and Ca, but there were no statistically significant differences compared to healthy teeth and teeth treated with adhesives. Lay description: This study focused on testing a new dental adhesive containing small particles called ZnO nanoparticles (ZnO‐NPs). This study aimed to demonstrate whether this adhesive with ZnO‐NPs could be useful for treating dental fluorosis by improving its adhesion to teeth. One of the first objectives was to determine whether the dental adhesive could adhere better to teeth affected by mild or moderate fluorosis than to healthy teeth by measuring whether the levels of two important elements for healthy teeth, calcium (Ca) and phosphorus (P), were affected by the adhesive. The size and shape of the small particles and teeth with mild or moderate fluorosis were observed using scanning electron microscopy. The nanoparticles were small (< 100 nm) and had specific quasi‐spherical and hexagonal prismatic shapes. More damage to the enamel was observed in teeth with mild or moderate fluorosis than in healthy teeth. The adhesive strength test demonstrated that the dental adhesive with 3% ZnO‐NPs had the best adhesion on all healthy conditions of teeth. It was particularly effective in teeth with mild or moderate fluorosis. Finally, the evaluation of the levels of P and Ca on the enamel showed that teeth with fluorosis had higher levels of these elements, but using the dental adhesive with ZnO‐NPs did not change the levels of these elements significantly because the adhesive avoided greater detachment because of greater adhesion to these surfaces. In conclusion, adding these small particles to dental adhesives could be an option for treating teeth affected by fluorosis. It stuck well and did not affect the levels of the important elements in the teeth.

Adhesive Bond Integrity of Experimental Zinc Oxide Nanoparticles Incorporated Dentin Adhesive: An SEM, EDX, μTBS, and Rheometric Analysis

Influence of TiO2 and ZrO2 Nanoparticles on Adhesive Bond Strength and Viscosity of Dentin Polymer: A Physical and Chemical Evaluation

Aluminum zirconate nanoparticles in etch and rinse adhesive to caries affected dentine: An in‐vitro scanning electron microscopy, elemental distribution, antibacterial, degree of conversion and micro‐tensile bond strength assessment

Dentin Bond Integrity of Filled and Unfilled Resin Adhesive Enhanced with Silica Nanoparticles—An SEM, EDX, Micro-Raman, FTIR and Micro-Tensile Bond Strength Study

Reconstruction of a Demineralized Dentin Matrix Via Rapid Deposition of CaF2 Nanoparticles in Situ Promotes Dentin Bonding.

Zinc Zeolite Nanoparticle-Modified Adhesive Resin: Influence on Dentin Matrix Degradation and Bond Strength to Dentin

Assessment of the Physical Properties of an Experimental Adhesive Dentin Bonding Agent with Carbon Nanoparticles

An In Vitro Study Comparing the Antibacterial and Mechanical Properties of Zinc Oxide-Based Nanofillers in Orthodontic Adhesives for White Spot Lesion Prevention in Fixed Orthodontic Therapy

Influence of carbon and graphene oxide nanoparticle on the adhesive properties of dentin bonding polymer: A SEM, EDX, FTIR study

Quantum Dots as Nonagglomerated Nanofillers for Adhesive Resins

Adhesive bond integrity of Y‐TZP post with calcium fluoride infiltrated resin dentin adhesive: An SEM, EDX, FTIR and micro‐Raman study

Influence of ER-CR-YSGG Laser and Photodynamic Therapy on the Dentin Bond Integrity of Nano-Hydroxyapatite Containing Resin Dentin Adhesive: SEM-EDX, Micro-Raman, Micro-Tensile, and FTIR Evaluation

Orthodontic adhesive loaded with different proportions of ZrO2 silver‐doped nanoparticles: An in vitro μTBS, SEM, EDX, FTIR, and antimicrobial analysis

Nano-β-tricalcium phosphate incorporated root dentin adhesive in the bonding interface of yttria-stabilized tetragonal zirconia polycrystalline post

Graphene oxide nano-filler based experimental dentine adhesive. A SEM / EDX, Micro-Raman and microtensile bond strength analysis

Incorporation of Zirconium Oxide Nanoparticles in Adhesive Resin for Bonding of Brackets to Enamel Conditioned with Er,Cr:YSGG, Photodynamic Therapy, and Phosphoric Acid

Study of ZnO nanoparticle‐doped dental adhesives on enamels with fluorosis: Electron microscopy, elemental composition and shear bond strength analysis

Effect of zinc nanoparticles on the mechanical properties and stability of the resin-dentin bonded interface

Bond strength and surface roughness assessment of novel antimicrobial polymeric coated dental cement

The influence of adding modified zirconium oxide-titanium dioxide nano-particles on mechanical properties of orthodontic adhesive: an in vitro study

Evaluation of adhesive properties and enzymatic activity at the hybrid layer of a simplified adhesive loaded with 0.2 % Cu and 5 % ZnO nanoparticles: A Randomized Clinical Trial and ex vivo analysis