Abstract:A low temperature drift curvature-compensated complementary metal oxide semiconductor (CMOS) bandgap reference is proposed. A dual-differential-pair amplifier was employed to add compensation with a high-order term of TlnT (T is the thermodynamic temperature) to the traditional 1st-order compensated bandgap. To reduce the offset of the amplifier and noise of the bandgap reference, input differential metal oxide semiconductor field-effect transistors (MOSFETs) of large size were used in the amplifier and to keep a low quiescent current, these MOSFETs all work in weak inversion. The voltage reference’s temperature curvature has been further corrected by trimming a switched resistor network. The circuit delivers an output voltage of 3 V with a low dropout regulator (LDO). The chip was fabricated in Taiwan Semiconductor Manufacturing Company (TSMC)’s 0.35-μm CMOS process, and the temperature coefficient (TC) was measured to be only 2.1×10−6/°C over the temperature range of −40–125 °C after trimming. The power supply rejection (PSR) was −100 dB @ DC and the noise was 42 μV (rms) from 0.1 to 10 Hz.

First-order Bandgap Reference Source Design with High Power Supply Rejection Ratio

A 0.9-V high-PSRR bandgap with self-cascode current mirror

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A Novel High PSR Voltage Reference with Secondary Temperature Compensation

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A High Precision Circuit of Bandgap Voltage Reference

A Design With High Order Compensation and low Temperature Drift Bandgap Reference Voltage Source

Design of a High PSRR Low-pressure Bandgap Reference Source with Curvature Compensation

A 2.8 Ppm/°c High PSRR BiCMOS Bandgap Voltage Reference

A Precise Bandgap Reference with High PSRR

A 0.19 Ppm/Degrees C Bandgap Reference Circuit With High-Psrr

High PSRR COMS Bandgap Voltage Reference

A 0.19 ppm/°C bandgap reference circuit with high-PSRR

Design of a bandgap reference voltage source with low temperature coefficient and high precision

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A 1.74 Ppm/&#x00b0;c, High PSRR Bandgap Reference with Fast Start-Up

A Temperature-Compensated Voltage Reference with High PSRR

A Low Process Sensitivity, High PSRR Band-gap Reference

A Novel High-Precision Bandgap Reference with Differential Common-Gate Structure

A Bandgap Reference with Temperature Compensation and Its Output Buffer