Abstract:In this work, carrier-phase direct numerical simulation (CP-DNS) is conducted for a pulverized coal flame in a temporally evolving turbulent jet with flue gas recirculation (FGR). Detailed gas phase kinetics are considered and heavy hydrocarbon molecules up to C20 are included to accurately represent tars in the volatile matter. The structure of the pulverized coal flame is analyzed with different flamelet models considering two mixing scenarios, namely the mixing of recirculated flue gases with the other fuel or oxidizer streams. In the first model approach, the mixing of recirculated flue gases with the gaseous fuels released from the coal particle is characterized with a fuel-split-based flamelet (FLT-FS) model. In the second approach, the mixing of flue gases with the transport air is described with an oxidizer-split-based flamelet (FLT-OS) model. In total, five trajectory variables are introduced in the flamelet table to represent the pulverized coal combustion states with FGR. The suitability of the flamelet models is evaluated through an a priori analysis for both the fully ignited state, as well as (more challenging) the igniting states. Comparisons show that both the FLT-FS model and the FLT-OS model perform well in predicting the thermo-chemical quantities for the fully ignited state. The FLT-OS model performs slightly better than the FLT-FS model in predicting the gas temperature and specific species mass fractions. This is due to the fact that the partial oxidization of the gaseous fuels by the hot flue gases outside the mixing layers cannot be reproduced by the FLT-FS model. While the state at the beginning of ignition can still be accurately predicted by the FLT-OS model, discrepancies can be observed for the tar species C20H10 and the intermediate species CO at a later stage when many particles ignite and the reason for this is explained. Further analysis in the flamelet solution spaces shows that the gaseous fuels are ignited on the fuel-lean side. The time evolution of the gas temperature from the beginning of ignition to the fully ignited state can be overall characterized by both flamelet models.

Analytical modeling of mass transfer dynamics, velocity, heat transfer and enthalpy in a gas-liquid combustible mixture

Characteristic Analysis of Low-Velocity Gas Filtration Combustion in an Inert Packed Bed

Low Mach number lattice Boltzmann model for turbulent combustion: flow in confined geometries

Numerical Simulation for Combustion of Droplet with Volume of Fluid Formulation

Modeling Droplet Vaporization and Combustion with the Volume of Fluid Method at a Small Reynolds Number

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

A new robust modeling strategy for multi-component droplet heat and mass transfer in general ambient conditions

Heat and Mass Transfer in Combustion: Fundamental Concepts and Analytical Techniques

Modelling the Combustion of Thermally Thick Biomass Particles

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Flame Structure Analysis and Flamelet Modeling of Turbulent Pulverized Solid Fuel Combustion with Flue Gas Recirculation

Multicomponent droplet combustion with rapid internal mixing

Large Eddy Simulation of Turbulent Premixed Combustion Using Tabulated Detailed Chemistry and Presumed Probability Density Function

Theoretical analysis on droplet vaporization at elevated temperatures and pressures

Turbulent Flame Propagation in Hydrogen-Air and Methane-Air Mixtures in the Field of Synthetic Turbulence: Direct Numerical Simulation

Numerical Modelling of Combustion Process with the Use of ANSYS FLUENT Code

Numerical Investigation of Gaseous Hydrogen and Liquid Oxygen Combustion under Subcritical Condition

Analytical and Numerical Studies on the Evaporation and Combustion of a Droplet Under Forced Convection

A NUMERICAL STUDY ON THE TRANSITION CHARACTERISTICS OF AN INVERSE MICRO-SCALE DIFFUSION FLAME TO MICRO-SCALE PREMIXED FLAME UNDER HEAT RECIRCULATION CONDITIONS

Numerical Modeling of High-Enthalpy Two-Phase Flow in a Channel with Transverse Injection of a Reactive Liquid

Hydrogen, methane and one of their fuel blends combustion: CFD analysis and numerical-experimental comparisons of fixed and mobile applications