Abstract:A resonator coupler for subcutaneous implants has been developed with a new impedance matching pattern added to the conventional loop antenna. The tuning element of a concentric metal pad contributes distributed capacitance and inductance to the planar inductive loop and improves resonance significantly. It provides a better qualify factor for resonant coupling and a much lower reflection coefficient for the implant electronics. Practical constraints are taken into account for designs including the requirement of operation within a regulated frequency band and the limited thickness for a monolithic implant. In this work, two designs targeting to operate in the two industrial, scientific, and medical (ISM) bands at 903 MHz and 2.45 GHz are considered. The tuning metal pad improves their resonances significantly, compared to the conventional loop designs. Since it is difficult to tune the implant antenna after implantation, the effects of tissue depth variations due to the individual's surgery and the appropriate implant depths are investigated. Simulations conducted with the dielectric properties of human skin documented in the literature are compared to measurements done with hydrated ground pork as phantoms. Experiments and simulations are conducted to explain the discrepancies in frequency shifts due to the uses of pork phantoms. The design method is thus validated for uses on human skin. A noninvasive localization method to identify the implant under the skin has been examined and demonstrated by both simulations and measurements. It can efficiently locate the subcutaneous implant based on the high quality-factor resonance owing to the tuning elements in both implant and transmitter couplers. The planar resonant coupler for wireless power transfer shows good performance and promise in subcutaneous applications for implants.

Coupling and maintaining link efficiency ultrasonics in transcutaneous energy transfer systems

A transcutaneous energy transmission system for artificial heart adapting to changing impedance.

Multichannel Piezo‐Ultrasound Implant with Hybrid Waterborne Acoustic Metastructure for Selective Wireless Energy Transfer at Megahertz Frequencies

A Resonant Coupler for Subcutaneous Implant

A mm-sized acoustic wireless implantable neural stimulator based on a piezoelectric micromachined ultrasound transducer

Enhancing Ultrasound Power Transfer: Efficiency, Acoustics, and Future Directions

An ultrasound-driven implantable wireless energy harvesting system using a triboelectric transducer

A Current-Switching Communication Technique for Miniaturized Medical Implants

Feasibility Testing of the Bionet Sonar Ultrasound Transcutaneous Energy Transmission (UTET) System for Wireless Power and Communication of a LVAD

Omnidirectional Wireless Power Transfer for Millimetric Magnetoelectric Biomedical Implants

Portable through-metal ultrasonic power transfer using a dry-coupled detachable transmitter

Design considerations for ultrasonic power transmission to millimeter-sized implantable microelectronics devices

A Tissue-Channel Transcutaneous Power Transfer Technique for Implantable Devices

Acoustic Tunable Battery‐Free Implants Based on Sustainable Triboelectric Nanogenerators With Metal‐Polymer Intermixing Layers

Design and characterization of an ultrasonic lamb-wave power delivery system

Analysis and Design of a PMUT-based transducer for Powering Brain Implants

A Novel Design of Transcutaneous Power and Data Bidirectional Transfer System for Biomedical Implants

Wireless Power Transfer Techniques for Implantable Medical Devices: A Review

Optimization of the Coupling Coefficient of the Inductive Link for Wireless Power Transfer to Biomedical Implants

Modeling and Measurement of an Ultrasound Power Delivery System for Charging Implantable Devices Using an AlN-Based pMUT as Receiver

The effect of using two coils in a floating mass transducer for implantable middle ear hearing devices