Abstract:A characteristic feature of high-entropy alloys is high strength at maintaining plasticity, wear and corrosion resistance, and fracture toughness at cryogenic temperatures. Currently, CoCrFeNiMn is the best-investigated high-entropy compound. However, its application is limited in the high-temperature region due to the low values of the deforming stress level at the plasticity breaking point at T>296 K. One of the common ways to improve the material durability is the addition of substitution atoms of larger atomic radius, and Al, Ti, and Mo are some of these atoms. The paper presents the analysis of the mechanical behavior of single crystals of CoCrFeNiMn and CoCrFeNiMо FCC high-entropy alloys (at. %) oriented along the [001] direction: the author studied the temperature dependence of critical shear stresses τcr(T) within the temperature range of T=77–973K, the type of dislocation structure, strain hardening coefficient θII, plasticity and fracture at Т=296 K under tension. The study shows that the alloying with Mo atoms 4 at. % of the CoCrFeNi system (at. %) causes the solid solution hardening, and critical shear stresses τcr increase within the entire studied temperature range. The onset of plastic deformation is associated with slip at all temperature tests. At T=296 K, the author identified a planar dislocation structure with flat dislocation pile-ups and dislocation networks in CoCrFeNiMo while in equiatomic CoCrFeNiMn, at such test temperature, a uniform distribution of dislocations was observed in several systems without flat pile-ups. Work hardening coefficient, plasticity, and the level of stresses before fracture turn out to be similar in [001]-crystals of CoCrFeNiMo and CoCrFeNiMn high-entropy alloys, which are determined by the development of slip deformation simultaneously in several systems. Crystals are destroyed viscously at 296 K at the same level of stress.

THERMO-MECHANICAL ASSESSMENT OF HIGH ENTROPHY (Fe-Ni-Cx (X=0.3-0.5), (Fe-Cr-Cx (X=0.3-0.5) TERNARY ALLOYS SYSTEM USING CALPHAD METHOD

Thermo-mechanical fedamo based calculations of hea (Fe-Ni-Cx (X=0.3-0.5) ternary alloys system using Calphad method

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Phase Equilibria in the Al–Co–Cr–Fe–Ni High Entropy Alloy System: Thermodynamic Description and Experimental Study

Microstructure and mechanical properties of non equiatomic FeCoNiCuMo high entropy systems

Phase Diagrams of High-Entropy Alloy System Al-Co-Cr-Fe-Mo-Ni

Studying the Effect of Cold Rolling and Heat Treatment on the Microstructure and Mechanical Properties of the Fe36Mn20Ni20Cr16Al5Si3 High Entropy Alloy

THE INFLUENCE OF CHEMICAL COMPOSITION ON SOLID SOLUTION AND STRAIN HARDENING OF SINGLE CRYSTALS OF FCC HIGH-ENTROPY ALLOYS

Temperature-dependent enthalpy and entropy stabilization of solid solution phases in non-equiatomic CoCrFeNiTi high entropy alloys: computational phase diagrams and thermodynamics

Strategies Regarding High-Temperature Strength and Toughness Applications for SUS304 Alloy

Microstructure and Mechanical Properties of High-Carbon-Containing Fe-Ni-Mn-Al-Cr High-Entropy Alloy: Effect of Thermomechanical Treatment

Influence of W, Mo and Ti trace elements on the phase separation in Al8Co17Cr17Cu8Fe17Ni33 based high entropy alloy

Phase equilibria in equiatomic CoCuFeMnNi high entropy alloy

High-Temperature Mechanical Behavior of Cobalt-Free FeMnCrNi(Al) High-Entropy Alloys

Experimental and Theoretical Investigations on the Phase Stability and Mechanical Properties of Cr7Mn25Co9Ni23Cu36 High-Entropy Alloy

Insight into the Microstructure and Micromechanical Behavior and Mechanism of the Constitutional Phase of FeNiCrAl0.63 Multi-Principal Element Alloy

High-Temperature Oxidation and Phase Stability of AlCrCoFeNi High Entropy Alloy: Insights from In Situ HT-XRD and Thermodynamic Calculations

Insight into the microstructure and micromechanical behavior and mechanism of the constitutional phase of FeNiCrAl 0.63 multi-principal element alloy

Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy

Microstructure, deformation behavior, and dynamic recrystallization kinetics of FeNiMnCu-based high entropy alloys prepared by mechanical alloying and spark plasma sintering