Abstract:For advanced performance lithium-ion batteries (LIBs) various novel electrode materials with high energy density have been extensively investigated. Cobaltosic oxide (Co3O4), commonly used as an anode in LIBs, has attracted much interest because of its high theoretical specific capacity (890 mAh center dot g(-1)), high tap density, and stable chemical properties. However, its practical use has been hindered because of its low electronic conductivity and poor rate capability. To address these problems, we investigated a liquid phase precipitation method followed by thermal treatment and obtained a unique lamellar Co3O4 powder. Its X-ray diffraction (XRD) diffraction peaks match the standard pattern for cubic phaseCo(3)O(4) with good crystallinity. We found that the Co3O4 powder consists of many irregular sheets (1.5-3.0 mu m in diameter, 100-300 nm in thickness) with numerous poles by scanning electronmicroscopy (SEM). Additionally, the surface area was about 30.5m(2) center dot g-1, and this was calculated from BET nitrogen adsorption isotherm measurement data. Remarkably, perfect performance was obtained as evaluated by electrochemical measurements, including a high initial discharge capacity (1444.5 mAh center dot g(-1) at 0.1C) and excellent capacity retention (charge capacity after 50 cycles was still greater than 1100.0 mAh center dot g(-1) at 0.1C). However, its rate capability was still not adequate (75.3% of the first charge capacity after 50 cycles at 1C). To improve the rate capability, commercial carbon nanotubes (CNTs) mixed with the Co3O4 powder was used to enhance the electronic conductivity. The charge capacity retention ratios were 96.3% after 70 cycles at 1C and 97.0% after 50 cycles at 2C. Therefore, enhanced electrochemical performance with impressive rate capability was obtained, as expected.

Co3V2O8 Nanorods embedded on 3D holey carbon boxes as hybrid anode material for LIBs

Robust 3D nanowebs assembled from interconnected and sandwich-like C@Fe3O4@C coaxial nanocables for enhanced Li-ion storage

"Electron-Sharing" Mechanism Promotes Co@Co 3 O 4 /CNTs Composite as the High-Capacity Anode Material of Lithium-Ion Battery.

"Electron-Sharing" Mechanism Promotes Co@Co3O4/CNTs Composite as the High-Capacity Anode Material of Lithium-Ion Battery.

High-performance Lithium Storage of Co3O4 Achieved by Constructing Porous Nanotube Structure

Porous CoC2O4 Nanorods As High Performance Anode Material for Lithium Ion Batteries

Nano-Co3O4 Anchored Helical Carbon Nanofibers As an Anode Material for Li-ion Batteries

Enhancing Lithium-Ion Storage Performance of Hollow CoS2/MoS2 Nanospheres Via N-doped Carbon-Coating

Oxidizing Solid Co into Hollow Co3O4 within Electrospun (Carbon) Nanofibers towards Enhanced Lithium Storage Performance

In Situ Construction of Heterostructured Co3O4/CoP Nanoflake Arrays on Carbon Cloth as Binder-Free Anode for High-Performance Lithium-Ion Batteries

Carbon‐Nanotube‐Cored Cobalt Porphyrin as a 1D Nanohybrid Strategy for High‐Performance Lithium‐Ion Battery Anodes

Carbon coated porous Co3O4 polyhedrons as anode materials for highly reversible lithium-ion storage

Introduction of as-prepared cobalt source-containing carbon nanotubes to Co1-S@C mesoporous nanospheres for an ultrahigh lithium storage

Porous Co3V2O8 Nanosheets with Ultrahigh Performance As Anode Materials for Lithium Ion Batteries

Three-Dimensional B-Doped Porous Carbon Framework Anchored with Ultrasmall Pbo/Pb Nanocrystals for Lithium Storage

Carbon coating hollow NiS nanoparticles anchored on Ti 3 C 2 nanosheet as high-performance anode for Lithium-ion batteries

Octahedral Co3O4 particles threaded by carbon nanotube arrays as integrated structure anodes for lithium ion batteries.

Enhanced lithium storage performance guided by intricate-cavity hollow cobalt phosphide

Implanting ultrafine tin oxide nanocrystals on hollow and porous carbon nanorods towards superior lithium storage

Hierarchical Co2VO4 Yolk-Shell Microspheres Confined by N-doped Carbon Layer As Anode for High-Rate Lithium-Ion Batteries

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries