Abstract:The present paper presents a straightforward method for producing thin film layers of sulfide quantum dots (PbS-QDs) on a glass substrate using chemical solution deposition (CSD) assisted by dipcoating technique. The deposited PbS-QDs films were subjected to a comprehensive analysis using atomic force microscopy (AFM), energy dispersive X-ray (EDX) scanning electron microscopy (SEM), X-ray diffraction (XRD), UV–vis–IR absorption, and photoluminescence spectroscopic (PL) techniques to investigate the effects of varying concentrations of diethanol amine (DEA) on their morphology, crystal structure, elemental composition, light absorption, and emission characteristics. The spherical shape of the PbS-QDs was confirmed by AFM and SEM images with average sizes around 100 and 50 nm, respectively. The energy dispersive X-ray (EDX) analysis provides evidence the existence of Pb and S elements within the PbS matrix. X-ray diffraction (XRD) results validate that the deposited films exhibit high crystallinity, with a preferential orientation along the (111) plane and a face-centered cubic lattice structure of PbS. The crystallite size of PbS is measured to be 46.6 nm. Based on the optical absorption measurements, we have determined the size range of PbS nanocrystals to be between 4.3 and 11.5 nm. The optical studies reveal the presence of two optical absorption edges within the visible and infrared spectrum, two direct band gap energy, two cut-off wavelengths, two confinement energy, two Urbach energy tail, and dual emission peaks of PbS-QDs at room temperature. The analysis reveals the presence of two distinct band gap energies, one in the visible range (1.3–2.28 eV) and the other in the infrared range (0.65–0.88 eV), which can be attributed to the formation of two distinct sizes of quantum dots situated in two different layers. The first layer, deposited directly on the glass substrate, comprises quantum dots with an average size of approximately 5.2 nm, while the second layer contains quantum dots with an average size of about 9.5 nm. This ability to tune the band gap of PbS in the visible range up to the IR band (0.65–2.28 eV) is a critical feature that holds the potential for the development of innovative optoelectronic devices.

Effect of synthesis routes for preparation of lead sulphide quantum dots based thin films by spin coating technique

Controlled Synthesis Of Near-Infrared Quantum Dots For Optoelectronic Devices

FACILE SYNTHESIS OF COLLOIDAL PbS QUANTUM DOTS

One-pot, easy and scalable synthesis of large-size short wave length IR emitting PbS quantum dots

One-pot aqueous synthesis of near infrared emitting PbS quantum dots

Effect of ligands on the photoluminescence properties of water-soluble PbS quantum dots

One-step synthesis and optical properties of PbS quantum dots

[Study of the Physical Properties of SnS Thin Films Deposited by Ultrasonic Spray Pyrolysis Method].

Highly enhanced solar conversion efficiency of novel layer-by-layer PbS:Hg and CdS quantum dots-sensitized ZnO thin films prepared by sol–gel spin coating

Chemical Synthesis of Nano-Sized particles of Lead Oxide and their Characterization Studies

Continuous flow synthesis of PbS/CdS quantum dots using substituted thioureas

In situ passivation for high-quality PbS colloidal quantum dots synthesized using a PbBr2 precursor

Aqueous Synthesis of CdTe/CdS/ZnS Quantum Dots and Their Optical and Chemical Properties

Room-Temperature, Multigram-Scale Synthesis and Conversion Mechanism of Highly Luminescent Lead Sulfide Quantum Dots

A Top–down Strategy Towards Monodisperse Colloidal Lead Sulphide Quantum Dots

Thiourea-Derived Single-Source Molecular Precursor For Spin-Coated PbS Thin Films

Ultrasound-assisted synthesis of PbS quantum dots stabilized by 1,2-benzenedimethanethiol and attachment to single-walled carbon nanotubes

Phase-Transfer Ligand Exchange of Lead Chalcogenide Quantum Dots for Direct Deposition of Thick, Highly Conductive Films

Synthesis and Photocatalytic Activity of High-Quality Lead(II) Sulfide Nanoparticles from Lead(II) Thiosemicarbazone Complexes as Single Source Precursors

The effect of precursor on the optical properties of carbon quantum dots synthesized by hydrothermal/solvothermal method

Influence of the DEA Concentration on Structural and Optical Properties of Nanodot PbS Thin Films Growth by Chemical Solution Deposition: Unveiling Dual Optical Absorption Edges