Abstract:Heavy metals, including lead, cause serious damage to human health and the surrounding environment. Natural biosorbents arise as environmentally friendly alternatives. In this study, two of the 41 isolates (8EF and 17OS) were the most efficient bacteria for growing on media supplemented with Pb2+ (1000 mg/L). At high concentrations up to 2000 mg/L, the pioneer isolate 17OS exhibited remarkable resistance to multiheavy metals. This isolate was identified as Paenibacillus dendritiformis 17OS and deposited in GenBank under accession number ON705726.1. Design-Expert was used to optimize Pb2+ metal removal by the tested bacteria. Results indicated that four of six variables were selected using a minimum-run resolution IV experimental design, with a significant affecting Pb2+ removal. Temperature and Pb2+ concentration were significant positive influences, whereas incubation period and agitation speed were significant negative ones. The tested strain modulated the four significant variables for maximum Pb2+ removal using Box-Behnken design. The sequential optimization method was beneficial in increasing biosorption by 4.29%. Dead biomass of P. dendritiformis 17OS was embedded with polyethersulfone to get a hydrophilic adsorptive membrane that can separate Pb2+ easily from aqueous solutions. SEM images and FT-IR analysis proved that the new biosorbent possesses a great structure and a lot of surface functional groups with a negative surface charge of - 9.1 mV. The removal rate of 200 mg/L Pb2+ from water reached 98% using 1.5 g/L of the immobilized biosorbent. The adsorption isotherm studies were displayed to determine the nature of the reaction. The adsorption process was related to Freundlich isotherm which describes the multilayer and heterogeneous adsorption of molecules to the adsorbent surface. In conclusion, dead bacterial cells were immobilized on a polyether sulfone giving it the characteristics of a novel adsorptive membrane for the bioremediation of lead from wastewater. Thus this study proposed a new generation of adsorptive membranes based on polyethersulfone and dead bacterial cells.

Fixed-bed adsorption of lead from battery recycling unit wastewater-optimization using Box-Behnken method

Remediation of lead toxicity with waste-bio materials from aqueous solutions in fixed-bed column using response surface methodology

A study on a fixed-bed for Pb(ii) removal by modified alkaline lignin-sodium alginate composite hydrogel

Experimental Design and Breakthrough Curve Modeling of Fixed-Bed Columns Utilizing a Novel 3D Coconut-Based Polyurethane-Activated Carbon Composite Adsorbent for Lead Sequestration

Dynamic Modelling, Simulation, and Sensitive Analysis of Lead Removal in a Fixed-Bed Adsorption Column using Waste-Based Materials

A hybrid system for lead removal of simulated battery industry Wastewater using electrocoagulation/electroflotation

Utilization of brown seaweed adsorbent for effective removal of Pb(II) from wastewater: Biosorption and column studies

Contaminants Removal from Wastewater of LFP Batteries Recycling Process Using Adsorption Methods

Efficient Adsorption of Lead Ions from Synthetic Wastewater Using Agrowaste-Based Mixed Biomass (Potato Peels and Banana Peels)

Two-step Recovery of Pb(II) and Cd(II) with Thiophene Functionalized Hydrogel from Lead-Acid Battery Wastewater: Insight into Ph-Regulated Separation

Stable and antibacterial tannic acid-based covalent polymeric hydrogel for highly selective Pb2+ recovery from lead-acid battery industrial wastewater

Removal of Pb(II) by lignin-sodium alginate composite in a fixed-bed column

Process optimization and modeling of Pb(II) ions adsorption on a new and reusable biocomposite material using experimental design approach

Fixed-bed column adsorption study: a comprehensive review

Chemical-Free Method for Recovery of Lead from Spent Lead Paste by Reductive Sulfation Technique from By-product Utilization

Valorization of carbon soot ash for the selective capture of lead ions from industrial waste water-A waste to resource approach

An immobilized biosorbent from Paenibacillus dendritiformis dead cells and polyethersulfone for the sustainable bioremediation of lead from wastewater

Removal of chemical oxygen demand and ammonia nitrogen from lead smelting wastewater with high salts content using electrochemical oxidation combined with coagulation–flocculation treatment

Effective remediation of lead(II) wastewater by Parkia speciosa pod biosorption: Box-Behnken design optimisation and adsorption performance evaluation

Fixed-bed adsorption of Pb(ii) and Cu(ii) from multi-metal aqueous systems onto cellulose- g-hydroxyapatite granules: optimization using response surface methodology

The performance of temperature and acid-modified sludge in removing lead and cadmium