Abstract:Phosphoric acid (PA)-doped ion exchange membranes have been recognized as a classical high-temperature proton exchange membrane (HT-PEM) material. Nonetheless, the leaching of PA from membranes occurs progressively during operation, inevitably diminishing overall performance. In this study, we present a novel approach for crafting two-dimensional porous organic polymer nanosheets (NS-POPs) synthesized through nanointerfacial azo-coupling polymerization. The prepared NS-POPs possessed different pore structures with main pore sizes of 0.55 nm and 1.19 nm, which were derived from the discrepancy of monomer structure. Subsequently, the NS-POPs were successfully incorporated into polybenzimidazole to create mixed-matrix membranes due to the good interface compatibility, characterized by homogeneity and stability facilitated by the 2D nature of NS-POPs. As a comparison, POPs with non-2D properties prepared by the solution method cannot be successfully obtained in good MMMs due to poor dispersibility and interface compatibility. Furthermore, the profusion of pore structures and the presence of N/O-rich functional groups in NS-POPs significantly enhance their PA uptake capacity with up to 289 %, consequently boosting proton conductivity. As a result, the composite membrane doped with NS-POPs demonstrated a maximum conductivity of up to 143 mS cm-1 at 180 degrees C, which is approximately 2.97 times that of pure membrane. And the peak power density of H2/O2 fuel cell based on the composite membrane was 378 mW cm-2, which was higher than PBI. Most significantly, the confinement effect exerted by the small pores in NS-POPs enables composite membranes to maintain a higher PA retention of up to 74 % even after a 48 h of high-temperature and high-humidity treatment. Our study introduces an innovative and straightforward approach to synthesizing porous organic polymer nanosheets. This work not only advances the understanding of the impact of interface compatibility on composite membrane fabrication, but also establishes a versatile technology for modulating pore size and managing PA leaching in HT-PEMs.

N-Substitute Polyphosphazenes Cross-Linked Hydroxyl-Terminated Speek High Temperature Proton Exchange Membrane to Achieve High Proton Conductivity Over Low Relative Humidity

HT-PEMs Based on Nitrogen-Heterocycle Decorated Poly (arylene Ether Ketone) with Enhanced Proton Conductivity and Excellent Stability

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Proton transfer efficiency enhanced over wide relative humidity: Etidronic acid-modified polyphosphazenes cross-linked polybenzimidazoles membranes

Bifunctional Acid Proton Conductor Doping to Improve the Comprehensive Properties of a Cross-Linked Polybenzimidazole High-Temperature Proton Exchange Membrane

Gel-state Polybenzimidazole Proton Exchange Membranes with Flexible Alkyl Sulfonic Acid Side Chains for a Wider Operating Temperature Range (25–240 °C)

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Electrospinning-assisted Construction of Rapid Proton Conduction Channels in Halloysite Nanotube-Encapsulated Ionic Liquid-Embedded Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes

Improving proton conductivity of sulfonated poly (ether ether ketone) proton exchange membranes at low humidity by semi-interpenetrating polymer networks preparation

Monolithic Macromolecule Membrane Based on Polybenzimidazole: Achieving High Proton Conductivity and Low Fuel Permeability through Multiple Cross-Linking

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Enhancement of comprehensive performance of high-temperature and low-humidity proton exchange membranes: Crosslinking of trifunctional proton conductor with branched polybenzimidazole

Polyoxometalate-Cross-Linked Proton Exchange Membranes with Post-Assembled Nanostructures for High-Temperature Proton Conduction

Sulfonated Polyphosphazene-Blended Self-Cross-Linked Polybenzimidazole-Based High-Temperature Proton Exchange Membranes: High Efficiency in Proton Transport at Low Humidity

A facile, effective thermal crosslinking to balance stability and proton conduction for proton exchange membranes based on blend sulfonated poly(ether ether ketone)/sulfonated poly(arylene ether sulfone)

High conductivity poly( meta -terphenyl alkylene)s proton exchange membranes for high temperature fuel cell

Preparation and investigation on the low temperature proton exchange membranes with the enhanced proton conductivity at subzero temperature

Incorporating 2D Porous Organic Polymer Nanosheets into High-Temperature Proton-Exchange Membranes for Low H3PO4 Loss

High performance polymer electrolyte membrane with efficient proton pathway over a wide humidity range and effective cross-linking network

Stable branched polybenzimidazole high temperature proton exchange membrane: Crosslinking and pentaphosphonic-acid doping lower fuel permeability and enhanced proton transport