Development and optimization of the parameters of processing (firing) of cable scrap with PVC insulation by steam gasification
A. V. Meshcheryakov,T. P. Dialektova,A. N. Zadiranov,M. Yu. Malkova,D. V. Russkih,A. A. Gapeev,S. V. Degtyarev
DOI: https://doi.org/10.1007/s11015-024-01797-0
2024-10-26
Metallurgist
Abstract:The process of depletion of ores accompanied by a permanent increase in the production and consumption of nonferrous metals led to the formation of a continuous shortage of copper rolled products and wire rods in the world economy and trade. To compensate this shortage, secondary raw materials, including, in particular, scrap and wastes of the cable and wire production and civil engineering, are now actively introduced in the commercial production. For this purpose, special equipment and installations were created for cable stripping, i.e., for the separation of cables into metal concentrate and plastic waste. However, the existing technologies of cable cutting, parallel with high levels of dust and noise, are characterized by significant losses of the metal (up to 32%) and low quality of finished products (containing at least 7–8% nonmetallic fraction represented mainly by the protective cable insulation). The indicated protective insulation is based on flexible polyvinyl chloride plastics and special admixtures aimed at increasing the ductility of the cable. In a melting furnace, the insulation ignites and releases into the furnace atmosphere H 2 , O 2 , Cl 2 , HCl, H 2 O, CO, and CO 2 , volatile hydrocarbons, and their chlorinated derivatives (chlorides, oxides, tetrahydride, tetramethyltin, etc.), which dissolve in the melt and may increase the concentration of hydrogen and oxygen in it. For this reason, we think that the concentrate obtained as a result of cable stripping is unsuitable for smelting copper and copper-based alloys. It can be used for smelting rough copper ingots, which requires the procedure of repeated refining remelting.
metallurgy & metallurgical engineering